• Welcome to https://albinowners.net, the new home of Albin Owners Group!
• You will need to log in here, and you may want to bookmark this site. If you don't remember your password, use the I forgot my password link to reset it.
• All content has been transferred from our previous site.
• Contact Us if you have any questions or notice a problem. If you're not receiving our email, include a phone number where we can text you.
• You will need to log in here, and you may want to bookmark this site. If you don't remember your password, use the I forgot my password link to reset it.
• All content has been transferred from our previous site.
• Contact Us if you have any questions or notice a problem. If you're not receiving our email, include a phone number where we can text you.
FAQ:
• Membership information
• Burgees
• How to post photos
• Membership information
• Burgees
• How to post photos
A25 companion water hatch prop rod
-
Northern Spy
- Gold Member
- Posts: 72
- Joined: Mon Jul 06, 2015 8:57 am
- Home Port: Belhaven N.C.
A25 companion water hatch prop rod
Has anyone rebuilt the rod that supports the hatch for the companionway? Mine keeps falling and I'm sick of getting bopped on the head.
-
DesertAlbin736
- Gold Member
- Posts: 2777
- Joined: Sun Mar 09, 2014 3:58 pm
- Home Port: Peoria, AZ USA
Re: A25 companion water hatch prop rod
No, but I'm sure a suitable replacement can be found somewhere. Either that or wear a helmet 
.
.La Dolce Vita
1971 Albin 25 #736
Yanmar 3GM30F
Gig Harbor Boatworks Nisqually 8 dinghy
Residence: Peoria, AZ
Homeport: Lake Pleasant, AZ & beyond
1971 Albin 25 #736
Yanmar 3GM30F
Gig Harbor Boatworks Nisqually 8 dinghy
Residence: Peoria, AZ
Homeport: Lake Pleasant, AZ & beyond
-
Northern Spy
- Gold Member
- Posts: 72
- Joined: Mon Jul 06, 2015 8:57 am
- Home Port: Belhaven N.C.
Re: A25 companion water hatch prop rod
Helmet it is then! I showed the assembly to some old timers on the dock and (not) sur]risingly they said it was some old hardware!
It looks to me like it is a sort of grease plunger. There is a slit on the plunger that I assume is to let grease pass.
I think there would have been an o-ring or leather washer to keep the grease in the tube.
It looks to me like it is a sort of grease plunger. There is a slit on the plunger that I assume is to let grease pass.
I think there would have been an o-ring or leather washer to keep the grease in the tube.
-
kerrye
- Gold Member
- Posts: 1022
- Joined: Wed Sep 16, 2015 1:12 pm
- Home Port: Denver
Re: A25 companion water hatch prop rod
I had some old camper jacks which wouldn't pump. I took them to a hydraulic supply company and they sized o-rings to replace the failed ones. Worked fine afterwards. Maybe a place like that could do the same for that part.