My pump will not turn on .. When I put the breaker on it not does turn in and the wires to the pump become hot. ... Is it time for a new pump or is there a problem elsewhere? I've had to turn the breaker on and off at times for the pump to work ... Thanks
Kevin g
New bern nc
• Welcome to https://albinowners.net, the new home of Albin Owners Group!
• You will need to log in here, and you may want to bookmark this site. If you don't remember your password, use the I forgot my password link to reset it.
• All content has been transferred from our previous site.
• Contact Us if you have any questions or notice a problem. If you're not receiving our email, include a phone number where we can text you.
• You will need to log in here, and you may want to bookmark this site. If you don't remember your password, use the I forgot my password link to reset it.
• All content has been transferred from our previous site.
• Contact Us if you have any questions or notice a problem. If you're not receiving our email, include a phone number where we can text you.
FAQ:
• Membership information
• Burgees
• How to post photos
• Membership information
• Burgees
• How to post photos
Fresh water pump
Moderator: Jeremyvmd
-
- Gold Member
- Posts: 289
- Joined: Fri Feb 10, 2012 12:51 pm
- Home Port: Oriental NC
- Location: Oriental NC
-
- Gold Member
- Posts: 1043
- Joined: Mon Aug 10, 2015 11:17 am
- Home Port: Waretown nj
Re: Fresh water pump
If the wires are getting hot it sounds like there might be a short or some arcing somewhere. I would start by replacing the pump as they are not too expensive
1989 Viking 45C “Knot Crazy”
1998 Albin 28te "Shady Lady" *sold*
1999 seagull nautico 19 "Purrrspective" *sold*
Native watercraft prostaff
1998 Albin 28te "Shady Lady" *sold*
1999 seagull nautico 19 "Purrrspective" *sold*
Native watercraft prostaff
- catalina_mike
- Gold Member
- Posts: 721
- Joined: Mon Mar 09, 2015 11:20 am
- Home Port: Dana Point
Re: Fresh water pump
Stuck motor causing high amps and heat. It sometimes is as simple as tapping it to break it free without having to take it apart. Worse case you have to replace it..
Silverton 2007 36C
Sold - Albin 1999 28TE
SSI Instructor 13937
SDI / TDI Instructor 18172
USCG 100 Ton near coastal
Sold - Albin 1999 28TE
SSI Instructor 13937
SDI / TDI Instructor 18172
USCG 100 Ton near coastal
-
- Gold Member
- Posts: 289
- Joined: Fri Feb 10, 2012 12:51 pm
- Home Port: Oriental NC
- Location: Oriental NC
Re: Fresh water pump
Any suggestions on water pumps brands ?? And. Size
-
- Gold Member
- Posts: 1043
- Joined: Mon Aug 10, 2015 11:17 am
- Home Port: Waretown nj
Re: Fresh water pump
http://www.defender.com/product3.jsp?pa ... id=1245018
That's what I put in. I like jabsco pumps. Have one on the other boat, two on the Albin and two on my dads boat.
That's what I put in. I like jabsco pumps. Have one on the other boat, two on the Albin and two on my dads boat.
1989 Viking 45C “Knot Crazy”
1998 Albin 28te "Shady Lady" *sold*
1999 seagull nautico 19 "Purrrspective" *sold*
Native watercraft prostaff
1998 Albin 28te "Shady Lady" *sold*
1999 seagull nautico 19 "Purrrspective" *sold*
Native watercraft prostaff
-
- Gold Member
- Posts: 289
- Joined: Fri Feb 10, 2012 12:51 pm
- Home Port: Oriental NC
- Location: Oriental NC
Re: Fresh water pump
new pump installed ,,, the motor was seized up ... have to install the pump with motor facing up . when I took the old pump apart it was full of rust on the cam of the motor would not even turn....
-
- Gold Member
- Posts: 1043
- Joined: Mon Aug 10, 2015 11:17 am
- Home Port: Waretown nj
Re: Fresh water pump
That's the way mine was installed. I couldn't get mine to fit with the pump at the bottom. Might have to move it later but mine was seized up as well.
1989 Viking 45C “Knot Crazy”
1998 Albin 28te "Shady Lady" *sold*
1999 seagull nautico 19 "Purrrspective" *sold*
Native watercraft prostaff
1998 Albin 28te "Shady Lady" *sold*
1999 seagull nautico 19 "Purrrspective" *sold*
Native watercraft prostaff