• Welcome to https://albinowners.net, the new home of Albin Owners Group!
• You will need to log in here, and you may want to bookmark this site. If you don't remember your password, use the I forgot my password link to reset it.
• All content has been transferred from our previous site.
• Contact Us if you have any questions or notice a problem. If you're not receiving our email, include a phone number where we can text you.
• You will need to log in here, and you may want to bookmark this site. If you don't remember your password, use the I forgot my password link to reset it.
• All content has been transferred from our previous site.
• Contact Us if you have any questions or notice a problem. If you're not receiving our email, include a phone number where we can text you.
FAQ:
• Membership information
• Burgees
• How to post photos
• Membership information
• Burgees
• How to post photos
A25 Rudder Strut Repair Info
-
Elbowlake
- Gold Member
- Posts: 2
- Joined: Wed Sep 17, 2014 12:46 pm
- Home Port: Indian Purchase Township, Maine
- Location: Indian Purchase Township, Maine
A25 Rudder Strut Repair Info
Looking for information that would help repair a 1978 A25 rudder strut (runs from the keel to support the bottom of the rudder). I managed to bend mine on a rock while backing up the trailer. Dam Boat is still usable, but the strut has been bent up and to starboard. I have found information on dropping the rudder. Would like to know details on the strut such as how far into the keel the strut goes, how the strut is shaped inside the keel and how it is attached to the keel. Not sure if my best approach is to remove the strut from the keel to straighten it or if there is a possible replacement source. Would appreciate any insight.
1978 A25
Dam Boat
Elbow Lake, Maine
Dam Boat
Elbow Lake, Maine