• Welcome to https://albinowners.net, the new home of Albin Owners Group!
• You will need to log in here, and you may want to bookmark this site. If you don't remember your password, use the I forgot my password link to reset it.
• All content has been transferred from our previous site.
Contact Us if you have any questions or notice a problem. If you're not receiving our email, include a phone number where we can text you.

MD17C Mechanical Oil Pressure Gauge Change to Electric

Albin's "power cruisers"
Post Reply
ianmac
Gold Member
Gold Member
Posts: 5
Joined: Sat Aug 13, 2011 5:55 pm
Home Port: Nanoose Bay, British Columbia

MD17C Mechanical Oil Pressure Gauge Change to Electric

Post by ianmac »

I have an A25 with a mechanical oil pressure system (sender fitting in engine block with tiny tube up to mechanical gauge in dashboard). Had to break the glass on the front of the gauge to remove parts of disintegrated internal bezel which were interfering with the needle swing. I am thinking that the little white tubing from engine to gauge is getting old and vulnerable. Thinking that some MD17C engines have an electrical oil pressure sender and gauge. Has anyone changed over from mechanical to electrical and made this upgrade? Where did you get the sender fitting? Was it worth doing?

Thanks a lot !!!
Ian MacDonald
Nanoose Bay
Post Reply

Return to “A25 / A27 - True Classics”