I have a 2000 TE 28 with Yanmar 6LP-STE. There appears to be an extension between the turbo and mixing elbow which on mine is rusted out.
Does anyone have any information on this and how it can be replaced.
Thanks, Ray
• Welcome to https://albinowners.net, the new home of Albin Owners Group!
• You will need to log in here, and you may want to bookmark this site. If you don't remember your password, use the I forgot my password link to reset it.
• All content has been transferred from our previous site.
• Contact Us if you have any questions or notice a problem. If you're not receiving our email, include a phone number where we can text you.
• You will need to log in here, and you may want to bookmark this site. If you don't remember your password, use the I forgot my password link to reset it.
• All content has been transferred from our previous site.
• Contact Us if you have any questions or notice a problem. If you're not receiving our email, include a phone number where we can text you.
FAQ:
• Membership information
• Burgees
• How to post photos
• Membership information
• Burgees
• How to post photos
Exhaust
-
RobS
- Gold Member
- Posts: 4044
- Joined: Wed Oct 03, 2007 6:20 am
- Home Port: Center Moriches, NY
- Contact:
Re: Exhaust
That is called the exhaust bend (aka dry bend). See attached mixing elbow diagram which includes the dry bend and part numbers.
You do not have the required permissions to view the files attached to this post. To view images, please register for a free account.
Rob S.
"TENACIOUS"
1974 Chris Craft 36' Commander Tournament
Cummins 6BTA 330B's
(Former Owner)
"TOY-RIFIC" 2000 28TE, 6LP, Hull 408
Luck is the residue of good design.
"TENACIOUS"
1974 Chris Craft 36' Commander Tournament
Cummins 6BTA 330B's
(Former Owner)
"TOY-RIFIC" 2000 28TE, 6LP, Hull 408
Luck is the residue of good design.
-
islandguy5
- Deckhand
- Posts: 6
- Joined: Sun Oct 26, 2008 8:59 am
- Home Port: Islesboro, ME
Re: Exhaust
Thanks so much. That is it.
Ray
Ray
-
jumpjet231
- Gold Member
- Posts: 75
- Joined: Mon Apr 06, 2009 6:04 am
Re: Exhaust
If it is rusted, your elbow is more than likely as well. I had a stainless elbow and dry bend made after mine rusted off the engine upon launching. I think there is a thread on here with my pics(search for 'mixing elbow"). It wasn't much more than Mack Boring wanted for cast iron OE parts that would have to be replaced again. John at Oxford Yacht (410-822-8556) can hook you up with one.
2004 28TE
"Wave-off"
"Wave-off"