• Welcome to https://albinowners.net, the new home of Albin Owners Group!
• You will need to log in here, and you may want to bookmark this site. If you don't remember your password, use the I forgot my password link to reset it.
• All content has been transferred from our previous site.
Contact Us if you have any questions or notice a problem. If you're not receiving our email, include a phone number where we can text you.

Need Electrical Guidance

Post Reply
mkh8911
Gold Member
Gold Member
Posts: 38
Joined: Sat Nov 19, 2011 10:42 am
Home Port: Ashland City, TN
Location: Tennessee

Need Electrical Guidance

Post by mkh8911 »

I own a '79 Albin 36 Classic with a 135 Perkins. I got the batteries installed and replaced the ignition switch because it had a plastic neck that was stripped and would not tighten. Not to make a long story longer, when I turn on the breaker for the running lights, the ignition system turns on without turning the key. I have rechecked the pole connections on the switch and, although the pole terminals are in a different physical location on the switch (i.e. 3 position switch with Ignition-Battery-Start) the switch works as currently connected. I don't think this was happening prior to ignition switch install. I've been chasing this problem for days and I'm about ready to pinch my head off....
Thanks,
Kevin
jleonard
Gold Member
Gold Member
Posts: 2115
Joined: Fri Sep 22, 2006 7:35 am
Home Port: Mystic, CT
Location: New Port Richey, FL

Re: Need Electrical Guidance

Post by jleonard »

This wiring diagram is from a circa 1978 Perkins engine (on a Mainship). Your's should be the same I would think.
You do not have the required permissions to view the files attached to this post. To view images, please register for a free account.
Formerly
1983 40 Albin trunk cabin
Attitude Adjustment
Mystic, CT
mkh8911
Gold Member
Gold Member
Posts: 38
Joined: Sat Nov 19, 2011 10:42 am
Home Port: Ashland City, TN
Location: Tennessee

Re: Need Electrical Guidance

Post by mkh8911 »

Fantastic!!! Thanks a million. This may give me answers I need. Thanks again!
User avatar
Captn_Dwt
Gold Member
Gold Member
Posts: 70
Joined: Tue Sep 20, 2011 9:45 am
Home Port: Pleasant Cove, Boothbay, ME
Location: Boothbay, Maine

Re: Need Electrical Guidance

Post by Captn_Dwt »

Here's another schematic...
FordLehmanEngineElectricSchematic.pdf
You do not have the required permissions to view the files attached to this post. To view images, please register for a free account.
Post Reply

Return to “36/37/40/43”