• Welcome to https://albinowners.net, the new home of Albin Owners Group!
• You will need to log in here, and you may want to bookmark this site. If you don't remember your password, use the I forgot my password link to reset it.
• All content has been transferred from our previous site.
Contact Us if you have any questions or notice a problem. If you're not receiving our email, include a phone number where we can text you.

Freshwater pump for Peugeot 4d61

Albin's "power cruisers"
Post Reply
User avatar
wlasci
Gold Member
Gold Member
Posts: 5
Joined: Tue Dec 22, 2009 2:52 pm
Home Port: Slidell, LA

Freshwater pump for Peugeot 4d61

Post by wlasci »

Desperately need a freshwater circulating pump for a Lehman-Peujeot 4D61 diesel in an Albin-27. Stuck 60 miles from home!
Any information where I might obtain a pump would be appreciated.

Call Bill at 985-640-3558 or e-mail wlasci@bellsouth.net
User avatar
Don from Mystic
Gold Member
Gold Member
Posts: 118
Joined: Thu Mar 06, 2008 12:54 pm
Location: Sunny Mystic Connecticut.....

Re: Freshwater pump for Peugeot 4d61

Post by Don from Mystic »

Wish I could have helped. I have the same boat/engine, and Im wondering how you made out and if you found a parts source?
User avatar
Don from Mystic
Gold Member
Gold Member
Posts: 118
Joined: Thu Mar 06, 2008 12:54 pm
Location: Sunny Mystic Connecticut.....

Re: Freshwater pump for Peugeot 4d61

Post by Don from Mystic »

I did some searching on the internet for Foreign car parts suppliers. There are many with automotive pumps that fit this vintage and brand engine. Most have photo's of the pump shown. Im not sure if this pump was "marinized" by Lehman but Im guessing even if it was, a long established automotive machine shop could make one good pump from your bad one and an auto one. Usually its the seals and bushings that go, not the shaft/impeller. This is a fresh water cooled engine so chances are parts from the origional are salvagable or rebuildable.
Panhdjoe
Gold Member
Gold Member
Posts: 238
Joined: Fri Feb 12, 2010 8:53 pm
Home Port: Osprey Marina, Myrtle Beach SC
Location: Columbia SC

Re: Freshwater pump for Peugeot 4d61

Post by Panhdjoe »

Hello, If you have not found a pump yet, I may have a solution. There is a machine shop here in Columbia SC that rebuilds water pumps. It is run by some oldtimers that do a lot of repairs that nobody else attempts anymore. They have been in business forever and have a good reputation around here. They are Neil parts 803 799 0857 I dont know if they do any shipping but you can send it to me and I will take it to them Joe
1983 36 classic
1995 192 Grady White w/ 150 Yamaha
2003 Boss 8'6" Dingy w/6 hp Suzuki
User avatar
wlasci
Gold Member
Gold Member
Posts: 5
Joined: Tue Dec 22, 2009 2:52 pm
Home Port: Slidell, LA

Re: Freshwater pump for Peugeot 4d61

Post by wlasci »

I have received a pump from:

Mike Bellamy,
Lancing Marine,
51 Victoria Road,
Portslade, BN41 1XY,
Sussex, England.
Phone (+44) 1273 411765
Fax (+44) 1273 430290
E-mail mike@lancingmarine.com
Web site http://www.lancingmarine.com

If You should need parts I recommend this source.

Bill Yauger A27 "Lokahi"
Post Reply

Return to “A25 / A27 - True Classics”