looking at 35te's and wondering if there is any occurance of blisters with Albins built in the last 10 years?
Thanks.
Skye
• Welcome to https://albinowners.net, the new home of Albin Owners Group!
• You will need to log in here, and you may want to bookmark this site. If you don't remember your password, use the I forgot my password link to reset it.
• All content has been transferred from our previous site.
• Contact Us if you have any questions or notice a problem. If you're not receiving our email, include a phone number where we can text you.
• You will need to log in here, and you may want to bookmark this site. If you don't remember your password, use the I forgot my password link to reset it.
• All content has been transferred from our previous site.
• Contact Us if you have any questions or notice a problem. If you're not receiving our email, include a phone number where we can text you.
FAQ:
• Membership information
• Burgees
• How to post photos
• Membership information
• Burgees
• How to post photos
blisters
-
Legacy
- Gold Member
- Posts: 411
- Joined: Mon Apr 17, 2006 1:40 pm
- Home Port: Boston, MA
- Location: Boston
- Contact:
1998 35TE no blisters
I have a 1998 and it has no blisters, just heavy oxidization from the previous owner's neglect. Love the boat. Good luck!
Rick
Rick
Rick
1998 Albin 35TE
"Legacy"
1998 Albin 35TE
"Legacy"
-
joe.baar
- Gold Member
- Posts: 240
- Joined: Thu Sep 13, 2007 12:27 am
- Home Port: Everett, WA
- Location: Seattle, WA
Blisters
The surveyor reported no blisters on our '95 last July. I trust this spring's bottom prep and paint job will bear that out also.
(former owners)
Joe Baar and Suzanne Lammers
1995 28TE "Liberty" 6LPA hull# 132
Ballard
Joe Baar and Suzanne Lammers
1995 28TE "Liberty" 6LPA hull# 132
Ballard
-
TD
- First Mate
- Posts: 117
- Joined: Wed May 24, 2006 10:59 pm
- Location: Seattle
I bought a 2000 TE35 twin Cummins 2 years ago on LI, NY and had it surveyed. There were no blisters. I also had the surveyor check the sides for delamanation. No problems were found. The reason I did this was because I bought a 1986 39' SeaRay several years back and had a little over $20,000 into fixing the side delams. I think Albin makes a really good hull and if it hasn't been damaged you are probably in good shape. I would still recommend a survey.
HANG'M HIGH
2000 35TE Cummins Twin 370HP
Seattle
2000 35TE Cummins Twin 370HP
Seattle