• Welcome to https://albinowners.net, the new home of Albin Owners Group!
• You will need to log in here, and you may want to bookmark this site. If you don't remember your password, use the I forgot my password link to reset it.
• All content has been transferred from our previous site.
Contact Us if you have any questions or notice a problem. If you're not receiving our email, include a phone number where we can text you.

Scupper Flapper assembly for 28TE

Engines, Electric, Plumbing, etc.

Moderator: Jeremyvmd

Post Reply
User avatar
drbob
First Mate
First Mate
Posts: 115
Joined: Mon Aug 10, 2015 2:58 pm
Home Port: Cape Harbour, Cape Coral, FL
Location: Cape Harbour, Cape Coral, Florida
Contact:

Scupper Flapper assembly for 28TE

Post by drbob »

The original Scupper Flapper for the 28 TE came in two parts:

1. A round piece of rubber with slots.
2. The flapper itself.

The round slotted piece holds the flapper. You insert the assembly in through the scupper opening in the stern from outside the boat. It snaps in place.

The flappers are readily available, but that round slotted piece of rubber is a mystery item.

Looking Aft:
Flapper full assembly - looking aft.jpg
Side view:
Flapper full assembly - side view.jpg
Looking from the outside in:
Flapper full assembly - looking forward.jpg
Any idea how to get a replacement for the slotted round rubber piece?
You do not have the required permissions to view the files attached to this post. To view images, please register for a free account.
User avatar
Norseman
Gold Member
Gold Member
Posts: 1700
Joined: Mon Jul 13, 2015 10:58 am
Home Port: Palm Coast, Florida
Location: Marina del Palma
Contact:

Re: Scupper Flapper assembly for 28TE

Post by Norseman »

This is a check valve kind of flapper for when you go backwards on a fish, to prevent flooding in the cockpit?
2001 28TE, 6LP-STE, 1,337 hrs, 19X18 four-blade wheel.
User avatar
drbob
First Mate
First Mate
Posts: 115
Joined: Mon Aug 10, 2015 2:58 pm
Home Port: Cape Harbour, Cape Coral, FL
Location: Cape Harbour, Cape Coral, Florida
Contact:

Re: Scupper Flapper assembly for 28TE

Post by drbob »

Thanks - any idea where I can acquire the slotted rubber piece?
User avatar
Norseman
Gold Member
Gold Member
Posts: 1700
Joined: Mon Jul 13, 2015 10:58 am
Home Port: Palm Coast, Florida
Location: Marina del Palma
Contact:

Re: Scupper Flapper assembly for 28TE

Post by Norseman »

drbob wrote: Wed Jun 09, 2021 10:17 am Thanks - any idea where I can acquire the slotted rubber piece?
I would start with this page:
https://www.greatlakesskipper.com/catal ... r+flappers
2001 28TE, 6LP-STE, 1,337 hrs, 19X18 four-blade wheel.
Post Reply

Return to “Albin Maintenance”