• Welcome to https://albinowners.net, the new home of Albin Owners Group!
• You will need to log in here, and you may want to bookmark this site. If you don't remember your password, use the I forgot my password link to reset it.
• All content has been transferred from our previous site.
Contact Us if you have any questions or notice a problem. If you're not receiving our email, include a phone number where we can text you.

Engine stalled at cruising speed

Engines, Electric, Plumbing, etc.

Moderator: Jeremyvmd

Post Reply
Albesaurus
Gold Member
Gold Member
Posts: 58
Joined: Sun Jan 12, 2020 6:26 am
Home Port: Connecticut

Engine stalled at cruising speed

Post by Albesaurus »

Yesterday I was out about 5 minutes running at 3200 RPMs when suddenly I lost power and the engine stalled. There was no warning or even the slightest sputter.... it was as if someone pressed the kill switch. I immediately checked the racor filter but I didn’t see any water or much debris to mention. After 5 minutes of looking around the bilge for something obvious. I started her up and ran again with no problem. A few hours later a similar experience at about the same RPM. Only this time the power loss was a spilt second and then it was back. I did not stall out. Then ran all the way home no more issue.

I’m guessing fuel clog that worked it’s way out or what?? Both racor and secondary were changed less than 20 hours ago. I did not take on any new fuel in the last month or so. Only other thing I can say is that it was extremely lumpy out and I was taking it on the stern quarter. Thinking maybe the fuel pickup lost contract for a second???

This is a 2002 28 with 315 yanmar.

Thanks
User avatar
Tree
Gold Member
Gold Member
Posts: 1602
Joined: Fri Mar 22, 2013 12:28 pm
Home Port: Portsmouth, UK
Location: Bordon, UK
Contact:

Re: Engine stalled at cruising speed

Post by Tree »

Stop/Start relay 100%

Scary when it happens isn't it?
Fisher Price 2
Hull Number AUL28489L900
Yanmar 6LP-STE
Built in Portsmouth RI, USA - Berthed in Portsmouth Hampshire, United Kingdom.
WillieC
Gold Member
Gold Member
Posts: 2273
Joined: Wed Nov 13, 2013 10:48 am
Home Port: Hood Canal, WA

Re: Engine stalled at cruising speed

Post by WillieC »

Instant diagnosis from half a world away! And for FREE!

Membership in AOG...priceless.

(Let us know if Tree nailed it, which I am fairly certain he has.)
User avatar
RobS
Gold Member
Gold Member
Posts: 4041
Joined: Wed Oct 03, 2007 6:20 am
Home Port: Center Moriches, NY
Contact:

Re: Engine stalled at cruising speed

Post by RobS »

Quite likely the relay to the fuel shut off solenoid. A fuel quality or fuel filter issue would would show up differently than what you describe.
Rob S.
"TENACIOUS"
1974 Chris Craft 36' Commander Tournament
Cummins 6BTA 330B's

(Former Owner)
"TOY-RIFIC" 2000 28TE, 6LP, Hull 408

Luck is the residue of good design.
Albesaurus
Gold Member
Gold Member
Posts: 58
Joined: Sun Jan 12, 2020 6:26 am
Home Port: Connecticut

Re: Engine stalled at cruising speed

Post by Albesaurus »

“Scary when it happens isn't it?”

Certainly was. I was headed out fishing with my wife and 3 kids. While I was looking around in the bilge my 8 year old was like..” dad why did you have to stop so fast?....I even started second guessing my own mind that maybe I leaned on the kill switch while at the helm...

Where is this relay located and where would I order it?

Thanks Men! Always great info here.

Nick
Albesaurus
Gold Member
Gold Member
Posts: 58
Joined: Sun Jan 12, 2020 6:26 am
Home Port: Connecticut

Re: Engine stalled at cruising speed

Post by Albesaurus »

nevermind... i just answered my own question. It’s near the injector pump. I’ll grab a part number off it and source it.

Thanks again
User avatar
RobS
Gold Member
Gold Member
Posts: 4041
Joined: Wed Oct 03, 2007 6:20 am
Home Port: Center Moriches, NY
Contact:

Re: Engine stalled at cruising speed

Post by RobS »

Mine was scary too as I was running WOT when it decided to shut her down. Check out my posts in this thread, all you need is here: http://www.albinowners.net/aog/viewtopi ... ilit=relay
Rob S.
"TENACIOUS"
1974 Chris Craft 36' Commander Tournament
Cummins 6BTA 330B's

(Former Owner)
"TOY-RIFIC" 2000 28TE, 6LP, Hull 408

Luck is the residue of good design.
Post Reply

Return to “Albin Maintenance”