Good Day ! New boat to me, and there is no zinc on the thruster; I am in salt water. I have no paper work on the thruster or even the name. All Albins must have the same thrusters? What type and size do I install and where. The prop side has a small female thread; I think?
There is a lot of questions on a new used boat.
Got my first boat bite yesterday on the prop. only 3 stiches.
Be Good!
• Welcome to https://albinowners.net, the new home of Albin Owners Group!
• You will need to log in here, and you may want to bookmark this site. If you don't remember your password, use the I forgot my password link to reset it.
• All content has been transferred from our previous site.
• Contact Us if you have any questions or notice a problem. If you're not receiving our email, include a phone number where we can text you.
• You will need to log in here, and you may want to bookmark this site. If you don't remember your password, use the I forgot my password link to reset it.
• All content has been transferred from our previous site.
• Contact Us if you have any questions or notice a problem. If you're not receiving our email, include a phone number where we can text you.
FAQ:
• Membership information
• Burgees
• How to post photos
• Membership information
• Burgees
• How to post photos
thruster n 28 Albin what zinc ?
Moderator: Jeremyvmd
-
- Deckhand
- Posts: 8
- Joined: Wed Jul 22, 2020 11:16 am
- Home Port: San Diego Ca
- Location: San Diego
- Norseman
- Gold Member
- Posts: 1710
- Joined: Mon Jul 13, 2015 10:58 am
- Home Port: Palm Coast, Florida
- Location: Marina del Palma
- Contact:
Re: thruster n 28 Albin what zinc ?
Yes, there is a zinc:
Or in my case, I am using an aluminum anode because the boat is in brackish waters.
Have seen 3 different bow thrusters on the Albin 28: My 2001 year model got the Vetus 5012.
I get my zincs from “boatzincs.com”.
Picture below.
Or in my case, I am using an aluminum anode because the boat is in brackish waters.
Have seen 3 different bow thrusters on the Albin 28: My 2001 year model got the Vetus 5012.
I get my zincs from “boatzincs.com”.
Picture below.
You do not have the required permissions to view the files attached to this post. To view images, please register for a free account.
2001 28TE, 6LP-STE, 1,337 hrs, 19X18 four-blade wheel.
-
- Gold Member
- Posts: 9
- Joined: Tue Mar 22, 2016 8:56 am
- Home Port: Cape Coral, FL
Re: thruster n 28 Albin what zinc ?
Yes there is a Zink on the Thrusters. You will see it when you remove the Propeller.
- Norseman
- Gold Member
- Posts: 1710
- Joined: Mon Jul 13, 2015 10:58 am
- Home Port: Palm Coast, Florida
- Location: Marina del Palma
- Contact:
Re: thruster n 28 Albin what zinc ?
On some boats the anode is plainly visible without removing the propeller, see above picture: The shiny piece of metal is the anode, or zinc.captaingary wrote: ↑Mon Aug 03, 2020 11:40 am Yes there is a Zink on the Thrusters. You will see it when you remove the Propeller.
2001 28TE, 6LP-STE, 1,337 hrs, 19X18 four-blade wheel.
-
- Gold Member
- Posts: 91
- Joined: Thu May 10, 2012 8:44 am
- Home Port: Burnt Store Marina, Punta Gorda, FL
Re: thruster n 28 Albin what zinc ?
Mine is a 2000. Zinc as photo above.
You do not have the required permissions to view the files attached to this post. To view images, please register for a free account.
David
Albin 28TE 2000
Yanmar 6LP-STE
Ex Albin 28TE 1994 Peninsular 300
Ex Albin 43 (Lehman) and many sailboats
Albin 28TE 2000
Yanmar 6LP-STE
Ex Albin 28TE 1994 Peninsular 300
Ex Albin 43 (Lehman) and many sailboats
-
- Deckhand
- Posts: 8
- Joined: Wed Jul 22, 2020 11:16 am
- Home Port: San Diego Ca
- Location: San Diego
Re: thruster n 28 Albin what zinc ?
To all you good folks, Thanks for the info. I will be hauling out in a week or so , so I will be searching for the zinc. A new used boat always needs a lot of attention! Now I have to work on my MGA.
Roy
Roy
- Norseman
- Gold Member
- Posts: 1710
- Joined: Mon Jul 13, 2015 10:58 am
- Home Port: Palm Coast, Florida
- Location: Marina del Palma
- Contact:
Re: thruster n 28 Albin what zinc ?
Check the motor label under the V-berth, that should tell you which model thruster you have, and then, which anode.. To all you good folks, Thanks for the info. I will be hauling out in a week or so , so I will be searching for the zinc
Easy.
2001 28TE, 6LP-STE, 1,337 hrs, 19X18 four-blade wheel.