I'm having trouble removing my starter. I have taken out 4 bolts, are there anymore? I got it to rotate about 1 in. but it wont separate from engine.
After about 4 hrs. in the blistering heat, I gave up. Am i missing something? Thank you. Matt.
• Welcome to https://albinowners.net, the new home of Albin Owners Group!
• You will need to log in here, and you may want to bookmark this site. If you don't remember your password, use the I forgot my password link to reset it.
• All content has been transferred from our previous site.
• Contact Us if you have any questions or notice a problem. If you're not receiving our email, include a phone number where we can text you.
• You will need to log in here, and you may want to bookmark this site. If you don't remember your password, use the I forgot my password link to reset it.
• All content has been transferred from our previous site.
• Contact Us if you have any questions or notice a problem. If you're not receiving our email, include a phone number where we can text you.
FAQ:
• Membership information
• Burgees
• How to post photos
• Membership information
• Burgees
• How to post photos
4D61 STARTER
-
6S2344
- Gold Member
- Posts: 18
- Joined: Wed May 13, 2015 6:12 pm
- Home Port: FALMOUTH MASS.
-
Bearkeley
- Gold Member
- Posts: 108
- Joined: Mon Jun 27, 2016 9:18 pm
- Home Port: South Florida
Re: 4D61 STARTER
The starter needs to be wiggled out...depending on the issue, the flywheel teeth may be tight against it. I can take a closer look again at ours to be sure, but I only recall the 4 bolts. If you post a picture, we may be able to help come up with other solutions. I recal having very little room for it given the other hoses, etc.
Former owner of the ‘Mary Jo'
1984 Albin 27FC (#74)
Hutchinson Island, Florida
1984 Albin 27FC (#74)
Hutchinson Island, Florida