Been taking pictures of a melted float switch and noticed a nasty crack under the motor and next to the stern tube.
Not sure how deep it is, need to find out very soon.
Anybody else seen a similar crack?
• Welcome to https://albinowners.net, the new home of Albin Owners Group!
• You will need to log in here, and you may want to bookmark this site. If you don't remember your password, use the I forgot my password link to reset it.
• All content has been transferred from our previous site.
• Contact Us if you have any questions or notice a problem. If you're not receiving our email, include a phone number where we can text you.
• You will need to log in here, and you may want to bookmark this site. If you don't remember your password, use the I forgot my password link to reset it.
• All content has been transferred from our previous site.
• Contact Us if you have any questions or notice a problem. If you're not receiving our email, include a phone number where we can text you.
FAQ:
• Membership information
• Burgees
• How to post photos
• Membership information
• Burgees
• How to post photos
Ugly crack under the engine..
Moderator: Jeremyvmd
-
Norseman
- Gold Member
- Posts: 1707
- Joined: Mon Jul 13, 2015 10:58 am
- Home Port: Palm Coast, Florida
- Location: Marina del Palma
- Contact:
Ugly crack under the engine..
You do not have the required permissions to view the files attached to this post. To view images, please register for a free account.
2001 28TE, 6LP-STE, 1,337 hrs, 19X18 four-blade wheel.
-
Nancy
- Gold Member
- Posts: 1847
- Joined: Thu Apr 23, 2009 8:41 pm
- Home Port: Lake Champlain
Re: Ugly crack under the engine..
Dag, I know you'll want to check for yourself, but I'm almost positive you'll find that that crack is not integral to the hull. Early hulls were shipped with open keels. This was a bit of strange design IMO as it left the stern tube kind of flapping in the breeze. That's how ours was. In later models, the keel was filled from the front of the stern tube to the engine. When we pulled our engine in the fall of 2017, we retrofitted a support for the stern tube:
I hope this gives you a little peace of mind. I'm sure others will jump in.
I hope this gives you a little peace of mind. I'm sure others will jump in.
You do not have the required permissions to view the files attached to this post. To view images, please register for a free account.
Nancy
2005 Albin 35CB
Yanmar 6LYA-STP 370
Valentine
Former boats
1995 Albin 28TE, Cummins 6BTA5.9 250, 2012-2022
1978 Trojan F32, 1998-2012
1983 Grady White 241 Weekender, 1988-1997
1980 Wellcraft 192 Classic, 1983-1987
2005 Albin 35CB
Yanmar 6LYA-STP 370
Valentine
Former boats
1995 Albin 28TE, Cummins 6BTA5.9 250, 2012-2022
1978 Trojan F32, 1998-2012
1983 Grady White 241 Weekender, 1988-1997
1980 Wellcraft 192 Classic, 1983-1987
-
Norseman
- Gold Member
- Posts: 1707
- Joined: Mon Jul 13, 2015 10:58 am
- Home Port: Palm Coast, Florida
- Location: Marina del Palma
- Contact:
Re: Ugly crack under the engine..
Thx Nancy, yeah that was good news.
Just some resin filler that cracked for whatever reason. (Perhaps even from production as it heated up when cured, then cracked when it hardened and cooled off.)
I will buy that:)
Just some resin filler that cracked for whatever reason. (Perhaps even from production as it heated up when cured, then cracked when it hardened and cooled off.)
I will buy that:)
2001 28TE, 6LP-STE, 1,337 hrs, 19X18 four-blade wheel.
-
Nancy
- Gold Member
- Posts: 1847
- Joined: Thu Apr 23, 2009 8:41 pm
- Home Port: Lake Champlain
Re: Ugly crack under the engine..
Glad you can get a good night's sleep. 
Nancy
2005 Albin 35CB
Yanmar 6LYA-STP 370
Valentine
Former boats
1995 Albin 28TE, Cummins 6BTA5.9 250, 2012-2022
1978 Trojan F32, 1998-2012
1983 Grady White 241 Weekender, 1988-1997
1980 Wellcraft 192 Classic, 1983-1987
2005 Albin 35CB
Yanmar 6LYA-STP 370
Valentine
Former boats
1995 Albin 28TE, Cummins 6BTA5.9 250, 2012-2022
1978 Trojan F32, 1998-2012
1983 Grady White 241 Weekender, 1988-1997
1980 Wellcraft 192 Classic, 1983-1987
-
Norseman
- Gold Member
- Posts: 1707
- Joined: Mon Jul 13, 2015 10:58 am
- Home Port: Palm Coast, Florida
- Location: Marina del Palma
- Contact:
Re: Ugly crack under the engine..
Yeah, I need to sleep, stressful being retired, you never get a day off..
2001 28TE, 6LP-STE, 1,337 hrs, 19X18 four-blade wheel.
-
stmbtwle
- Gold Member
- Posts: 80
- Joined: Mon Jan 21, 2019 8:09 am
- Home Port: Ruskin, FL
- Location: Tampa Bay, Florida.
Re: Ugly crack under the engine..
Polyester resin shrinks as it hardens, and if too thick it WILL crack. But if it's just a 'filler" I wouldn't worry about it unless there's a corresponding crack on the outside.
You COULD fill it with more resin and glass over it. Not really necessary but it might make any prospective buyers a little happier.
You COULD fill it with more resin and glass over it. Not really necessary but it might make any prospective buyers a little happier.
-
Norseman
- Gold Member
- Posts: 1707
- Joined: Mon Jul 13, 2015 10:58 am
- Home Port: Palm Coast, Florida
- Location: Marina del Palma
- Contact:
Re: Ugly crack under the engine..
Yeah, I could fill it but access is next to impossible, maybe if I removed the water pump and other pieces from the Starboard side of the engine.stmbtwle wrote: ↑Tue May 14, 2019 11:24 am Polyester resin shrinks as it hardens, and if too thick it WILL crack. But if it's just a 'filler" I wouldn't worry about it unless there's a corresponding crack on the outside.
You COULD fill it with more resin and glass over it. Not really necessary but it might make any prospective buyers a little happier.
Looks like it is benign, will leave it for now.
2001 28TE, 6LP-STE, 1,337 hrs, 19X18 four-blade wheel.