• Welcome to https://albinowners.net, the new home of Albin Owners Group!
• You will need to log in here, and you may want to bookmark this site. If you don't remember your password, use the I forgot my password link to reset it.
• All content has been transferred from our previous site.
• Contact Us if you have any questions or notice a problem. If you're not receiving our email, include a phone number where we can text you.
• You will need to log in here, and you may want to bookmark this site. If you don't remember your password, use the I forgot my password link to reset it.
• All content has been transferred from our previous site.
• Contact Us if you have any questions or notice a problem. If you're not receiving our email, include a phone number where we can text you.
FAQ:
• Membership information
• Burgees
• How to post photos
• Membership information
• Burgees
• How to post photos
Tight Steering wheel
-
Millertime
- Swabby
- Posts: 4
- Joined: Sun Jul 08, 2018 4:42 pm
- Home Port: Bradenton Florida
- Location: Bradenton Floria
Tight Steering wheel
Why is the steering on the 28TE so “tight “ or hard??? Also, best auto helm for the 28’
-
sailingzeus
- Gold Member
- Posts: 12
- Joined: Sun Jul 14, 2013 11:34 am
- Home Port: St. Augustine, Fl
Re: Tight Steering wheel
I had the same proble. I took the cylinder apart and found that the the two plastic rings of the piston were enlarged. I suspect that moisture infiltrated the system due to a bad o ring at the filler cup.
I installed a two size larger cylinder but I believe one size larger would have been enough.
Good luck
I installed a two size larger cylinder but I believe one size larger would have been enough.
Good luck