Hi I was just wondering about a few things. I have a 4d-61 in my boat. Has anyone tried to silence the air intake with a muffler? A lot of noise comes out of it. I'm not talking about a little foam pad something more substantial.
Also the oil cooler which the raw water flows through. The mount always breaks. I used 1/8th steel last time. I find it's just easier to let it dangle and the hoses absorb the vibration. I know I need engine mounts probably. Any thoughts would be appreciated. Thanks Chris
• Welcome to https://albinowners.net, the new home of Albin Owners Group!
• You will need to log in here, and you may want to bookmark this site. If you don't remember your password, use the I forgot my password link to reset it.
• All content has been transferred from our previous site.
• Contact Us if you have any questions or notice a problem. If you're not receiving our email, include a phone number where we can text you.
• You will need to log in here, and you may want to bookmark this site. If you don't remember your password, use the I forgot my password link to reset it.
• All content has been transferred from our previous site.
• Contact Us if you have any questions or notice a problem. If you're not receiving our email, include a phone number where we can text you.
FAQ:
• Membership information
• Burgees
• How to post photos
• Membership information
• Burgees
• How to post photos
4d-61 air intake, oil cooler mount?
-
Sprig1
- Gold Member
- Posts: 390
- Joined: Thu Dec 11, 2014 5:05 am
- Home Port: Long Cove Marina, Chester River Maryland