• Welcome to https://albinowners.net, the new home of Albin Owners Group!
• You will need to log in here, and you may want to bookmark this site. If you don't remember your password, use the I forgot my password link to reset it.
• All content has been transferred from our previous site.
Contact Us if you have any questions or notice a problem. If you're not receiving our email, include a phone number where we can text you.

Fill depth for transmision - dip stick

Engines, Electric, Plumbing, etc.

Moderator: Jeremyvmd

User avatar
RobS
Gold Member
Gold Member
Posts: 4041
Joined: Wed Oct 03, 2007 6:20 am
Home Port: Center Moriches, NY
Contact:

Re: Fill depth for transmision - dip stick

Post by RobS »

dgetswet wrote: Thu Dec 31, 2020 8:17 am No I did not pull the magnet cap and screen. Paul never said to do that and to be honest I don't know where it is. I'll try and figure it it for the spring as I intend on changing the fluid again just to be on the safe side.
Here you go: https://www.sbmar.com/articles/removing ... a-zf-220a/
Rob S.
"TENACIOUS"
1974 Chris Craft 36' Commander Tournament
Cummins 6BTA 330B's

(Former Owner)
"TOY-RIFIC" 2000 28TE, 6LP, Hull 408

Luck is the residue of good design.
User avatar
dgetswet
First Mate
First Mate
Posts: 130
Joined: Mon Mar 26, 2018 7:59 am
Home Port: Baldwin, NY

Re: Fill depth for transmision - dip stick

Post by dgetswet »

Rob

Thank you very much for the information. When I change the fluid in the spring I will take that out and check it as well.

Have a Happy Safe New Year
RobS wrote: Thu Dec 31, 2020 8:23 am
dgetswet wrote: Thu Dec 31, 2020 8:17 am No I did not pull the magnet cap and screen. Paul never said to do that and to be honest I don't know where it is. I'll try and figure it it for the spring as I intend on changing the fluid again just to be on the safe side.
Here you go: https://www.sbmar.com/articles/removing ... a-zf-220a/
Thanks
Don N
2005 Albin Flush Deck
User avatar
RobS
Gold Member
Gold Member
Posts: 4041
Joined: Wed Oct 03, 2007 6:20 am
Home Port: Center Moriches, NY
Contact:

Re: Fill depth for transmision - dip stick

Post by RobS »

Glad to help.

You too, thanks.
Rob S.
"TENACIOUS"
1974 Chris Craft 36' Commander Tournament
Cummins 6BTA 330B's

(Former Owner)
"TOY-RIFIC" 2000 28TE, 6LP, Hull 408

Luck is the residue of good design.
User avatar
dgetswet
First Mate
First Mate
Posts: 130
Joined: Mon Mar 26, 2018 7:59 am
Home Port: Baldwin, NY

Re: Fill depth for transmision - dip stick

Post by dgetswet »

Hey Rob,

I know this was from a post I did last year but still have a problem and been looking for info on the net for 2 days now. You really seem to know your stuff on this and was wondering before I call the mechanic if you would know these two answers. 1. The magnet cap. Where is it located? I have two bolts on the bottom and a 36mm bolt. What I saw on some sites this may be it. 2nd question is the oil filter. If I had to guess it would be the square box with the 4 hex nuts.

I seem to keep getting some kind of hydraulic lock in reverse. If I can't figure it out Paul is my next call.

Thanks
RobS wrote: Sun Nov 01, 2020 3:22 pm Yes, Paul is great. Been to his shop a few times. Did you pull the magnet cap and screen?
Thanks
Don N
2005 Albin Flush Deck
Post Reply

Return to “Albin Maintenance”