• Welcome to https://albinowners.net, home of Albin Owners Group!
• If you don't remember your password, use the I forgot my password link to reset it.
• Contact Us if you have any questions. If you're not receiving our email, include a phone number where we can text you.
• If you don't remember your password, use the I forgot my password link to reset it.
• Contact Us if you have any questions. If you're not receiving our email, include a phone number where we can text you.
Warm wishes for a happy and peaceful holiday season!
FAQ:
• Membership information
• Burgees
• How to post photos
• Membership information
• Burgees
• How to post photos
2002 Albin 32+2 Trans issue
-
flscuba72
- Swabby
- Posts: 3
- Joined: Sun Dec 01, 2024 4:36 pm
- Home Port: Cape Canaveral FL
2002 Albin 32+2 Trans issue
Hello im buying a 2002 32+2 with a Cummins 5.9 and a leaking trans. Does anyone know if you have to pull the engine to pull the trans?
-
jmfernan
- Gold Member
- Posts: 33
- Joined: Mon Feb 27, 2012 1:10 am
- Home Port: Santa Barbara, CA
Re: 2002 Albin 32+2 Trans issue
Yes you do. Need to unbolt from engine and remove engine first. Engine must be tilted to remove without also removing the sink/livewell assembly. Tight but worked with my Yanmar 6LY. I did mine when my Trans output shaft leaked. Good time to clean up bilge, do motor mounts, etc.
Note this applies to the 32+2 with 3-piece floor hatches and steeper stairs; the 35 CB with longer stairs has a different hatch size I believe.
Joe 1999 32+2 CB
Note this applies to the 32+2 with 3-piece floor hatches and steeper stairs; the 35 CB with longer stairs has a different hatch size I believe.
Joe 1999 32+2 CB