Hi. Need to troubleshoot the oil pressure sender and gauge on my Yanmar 6LP. Started with the alarm at start up no longer beeping but a steady alarm until the pressure built up. Now the gauge doesn’t move while running. This is the Beede combo gauge unit.
Looking for the location of the sender on the engine. Thinking this is it but wanted to confirm. Thx!
• Welcome to https://albinowners.net, the new home of Albin Owners Group!
• You will need to log in here, and you may want to bookmark this site. If you don't remember your password, use the I forgot my password link to reset it.
• All content has been transferred from our previous site.
• Contact Us if you have any questions or notice a problem. If you're not receiving our email, include a phone number where we can text you.
• You will need to log in here, and you may want to bookmark this site. If you don't remember your password, use the I forgot my password link to reset it.
• All content has been transferred from our previous site.
• Contact Us if you have any questions or notice a problem. If you're not receiving our email, include a phone number where we can text you.
FAQ:
• Membership information
• Burgees
• How to post photos
• Membership information
• Burgees
• How to post photos
Pic of oil pressure location on 6LP?
-
jms02050
- Gold Member
- Posts: 175
- Joined: Mon Jul 21, 2008 4:24 pm
Pic of oil pressure location on 6LP?
You do not have the required permissions to view the files attached to this post. To view images, please register for a free account.
Jim S.
2003 28 TE - Full Circle
2003 28 TE - Full Circle
-
jms02050
- Gold Member
- Posts: 175
- Joined: Mon Jul 21, 2008 4:24 pm
Re: Pic of oil pressure location on 6LP?
Also wondering what folks with the Beede gauge see for pressure underway?
Jim S.
2003 28 TE - Full Circle
2003 28 TE - Full Circle
-
catalina_mike
- Gold Member
- Posts: 721
- Joined: Mon Mar 09, 2015 11:20 am
- Home Port: Dana Point
Re: Pic of oil pressure location on 6LP?
There are two. one is the idiot light and one the gauge. I replaced mine when I did my new dash. I unfortunately do not remember which was which. Get a jumper and test each to find the idiot light or find a engine diagram. My engine manual is too large to upload but search the net they are out there.
Silverton 2007 36C
Sold - Albin 1999 28TE
SSI Instructor 13937
SDI / TDI Instructor 18172
USCG 100 Ton near coastal
Sold - Albin 1999 28TE
SSI Instructor 13937
SDI / TDI Instructor 18172
USCG 100 Ton near coastal
-
jms02050
- Gold Member
- Posts: 175
- Joined: Mon Jul 21, 2008 4:24 pm
Re: Pic of oil pressure location on 6LP?
Found this info which my mechanic confirmed. Sender is on the far right. Hope this helps others.
You do not have the required permissions to view the files attached to this post. To view images, please register for a free account.
Jim S.
2003 28 TE - Full Circle
2003 28 TE - Full Circle
-
REBMystic
- Gold Member
- Posts: 128
- Joined: Sat Nov 12, 2022 10:27 pm
- Home Port: Mystic, CT
Re: Pic of oil pressure location on 6LP?
Hey Mike,catalina_mike wrote: ↑Tue Jul 23, 2024 12:48 pm There are two. one is the idiot light and one the gauge. I replaced mine when I did my new dash. I unfortunately do not remember which was which. Get a jumper and test each to find the idiot light or find a engine diagram. My engine manual is too large to upload but search the net they are out there.
I need a new idiot light oil pressure sensor. wired pulled out and I don't get the buzz when I start the engine. Oil pressure reads fine. I am having trouble finding the part number. The parts manual wiring harness diagram just calls everything "sensor". You happen to know a way to find?
Thx
Rob
- Rob
2001 Albin 31 TE
"Time On The Pond"
2001 Albin 31 TE
"Time On The Pond"
-
catalina_mike
- Gold Member
- Posts: 721
- Joined: Mon Mar 09, 2015 11:20 am
- Home Port: Dana Point
Re: Pic of oil pressure location on 6LP?
Not sure what would work. I had to change my oil sender for my new Beede gauge. Amazon has several I also found a Yanmar tractor one that had an eye connection. I would try that one for the thread. I believe they are BSP not tapered but straight threads.
https://a.co/d/f06kwsJ
https://a.co/d/f06kwsJ
Silverton 2007 36C
Sold - Albin 1999 28TE
SSI Instructor 13937
SDI / TDI Instructor 18172
USCG 100 Ton near coastal
Sold - Albin 1999 28TE
SSI Instructor 13937
SDI / TDI Instructor 18172
USCG 100 Ton near coastal
-
ControlIssues32
- Mate
- Posts: 16
- Joined: Sun May 17, 2020 8:52 pm
- Home Port: Hingham, ma
Re: Pic of oil pressure location on 6LP?
catalina_mike -
Thanks for the part number!
While normal, my oil pressure goes way down at idle and always has. I say normal but really have no idea what normal is (guess that applies to ALOT of things:)
It picks up with RPM’s so haven’t bothered to look into. Going on 4-5 years now but having a spare for when I get off my ars to look at it is well worth the $16-17 bucks:)
Thanks for the part number!
While normal, my oil pressure goes way down at idle and always has. I say normal but really have no idea what normal is (guess that applies to ALOT of things:)
It picks up with RPM’s so haven’t bothered to look into. Going on 4-5 years now but having a spare for when I get off my ars to look at it is well worth the $16-17 bucks:)