• Welcome to https://albinowners.net, the new home of Albin Owners Group!
• You will need to log in here, and you may want to bookmark this site. If you don't remember your password, use the I forgot my password link to reset it.
• All content has been transferred from our previous site.
• Contact Us if you have any questions or notice a problem. If you're not receiving our email, include a phone number where we can text you.
• You will need to log in here, and you may want to bookmark this site. If you don't remember your password, use the I forgot my password link to reset it.
• All content has been transferred from our previous site.
• Contact Us if you have any questions or notice a problem. If you're not receiving our email, include a phone number where we can text you.
FAQ:
• Membership information
• Burgees
• How to post photos
• Membership information
• Burgees
• How to post photos
fuel burn Albin 30fc
-
- Swabby
- Posts: 4
- Joined: Thu Sep 07, 2023 9:20 pm
- Home Port: Pensacola
- Location: Pensacola
fuel burn Albin 30fc
I have Albin 30FC with 265hp Perkins Diesel. Just purchased bring down from Nashville to Pensacola. would like to get an idea of fuel burn at say 7-8kt maybe 1800 -2000 RPM. George Sgiler
-
- Swabby
- Posts: 4
- Joined: Thu Sep 07, 2023 9:20 pm
- Home Port: Pensacola
- Location: Pensacola
Re: fuel burn Albin 30fc
I answered my own question about fuel burn on my Albin 30FC with 265hp Perkins. I brought the boat down river from Gallatin, TN to Demopolis, Al about 600 miles. It was generally smooth water so I played with different power settings and stern planes to determine best speed:fuel burn. I found that with planes full up at 1700RPM's the boat made about 8.7MPH. If I added power or moved the planes the boat either used more fuel for gaining only .3 to .5 MPH. At 1700 RPM's the fuel burn was right at 5.5GPH. Boat was very happy at that speed and so was I. Comfortable ride and not nearly as much noise as higher RPM's. I will bring boat on down river to Pensacola when the Demopolis Lock is repaired, estimated mid May 2024. I had just purchased this boat and myself and two friends were aboard and we were very comfortable and even though a small galley, we ate like kings. Will comment on overall trip when reaching Pensacola. But so far this boat has met all my expectations. One can expect to transit 12 locks on trip from say Nashville to Demopolis. Most locks were fast and easy except the one time we caught a barge just entering on the opposite side and we waited for 45 min. for it to clear.
- Tree
- Gold Member
- Posts: 1611
- Joined: Fri Mar 22, 2013 12:28 pm
- Home Port: Portsmouth, UK
- Location: Bordon, UK
- Contact:
Re: fuel burn Albin 30fc
Just for reference. My 28 will return about 2.5 nm to the gallon but that’s with a yanmar 6lp. I’m hoping to see a better return with the new running gear and should have an idea in the next month.
Fisher Price 2
Hull Number AUL28489L900
Yanmar 6LP-STE
Built in Portsmouth RI, USA - Berthed in Portsmouth Hampshire, United Kingdom.
Hull Number AUL28489L900
Yanmar 6LP-STE
Built in Portsmouth RI, USA - Berthed in Portsmouth Hampshire, United Kingdom.
-
- Gold Member
- Posts: 1861
- Joined: Thu Apr 23, 2009 8:41 pm
- Home Port: Lake Champlain
Re: fuel burn Albin 30fc
Hi George -- welcome to the forum if I haven't said that already.
Thanks for the follow-up on the first part of your trip. Sounds like a good adventure! Look forward to hearing about what comes next.
Thanks for the follow-up on the first part of your trip. Sounds like a good adventure! Look forward to hearing about what comes next.
Nancy
2005 Albin 35CB
Yanmar 6LYA-STP 370
Valentine
Former boats
1995 Albin 28TE, Cummins 6BTA5.9 250, 2012-2022
1978 Trojan F32, 1998-2012
1983 Grady White 241 Weekender, 1988-1997
1980 Wellcraft 192 Classic, 1983-1987
2005 Albin 35CB
Yanmar 6LYA-STP 370
Valentine
Former boats
1995 Albin 28TE, Cummins 6BTA5.9 250, 2012-2022
1978 Trojan F32, 1998-2012
1983 Grady White 241 Weekender, 1988-1997
1980 Wellcraft 192 Classic, 1983-1987
- REBMystic
- Gold Member
- Posts: 110
- Joined: Sat Nov 12, 2022 10:27 pm
- Home Port: Mystic, CT
-
- Swabby
- Posts: 4
- Joined: Thu Sep 07, 2023 9:20 pm
- Home Port: Pensacola
- Location: Pensacola
Re: fuel burn Albin 30fc
I just finished my trip in Albin 30 FC with 265hp Perkins. Found that best operating RPM to be 1600 which gives me just over 8mph. At this setting I found I burned about 4.4 gph which gives me about 1.8 statute miles to the gallon. I'm not sure what amount of my 136 gallon fuel capacity is usable but I believe allowing for say 6 gallons on unusable fuel I have a range of about 290 statute miles which on the river trip from Demopolis, Al to Pensacola gave me a level of comfort as there are some long legs, and if Bobbie's Fish Camp did not have fuel, I would have need that range. Which by the way I was using Active Captain which showed a Martin Midstream Marina in Mobile, Al which is not there! So we ended up crossing Mobile Bay in 25kts of wind with rough seas, but the boat did very well and never a concern as we motored into the Fairhope Marina.
- Tree
- Gold Member
- Posts: 1611
- Joined: Fri Mar 22, 2013 12:28 pm
- Home Port: Portsmouth, UK
- Location: Bordon, UK
- Contact:
Re: fuel burn Albin 30fc
Now averaging 2.7mpg with the new wheel.
Fisher Price 2
Hull Number AUL28489L900
Yanmar 6LP-STE
Built in Portsmouth RI, USA - Berthed in Portsmouth Hampshire, United Kingdom.
Hull Number AUL28489L900
Yanmar 6LP-STE
Built in Portsmouth RI, USA - Berthed in Portsmouth Hampshire, United Kingdom.
-
- Gold Member
- Posts: 162
- Joined: Mon Sep 29, 2014 11:40 pm
- Home Port: Seattle Washington
Re: fuel burn Albin 30fc
"Now averaging 2.7mpg with the new wheel."
At what RPM/speed? Tell us more about the new wheel!!
Anthony Warren
1999 28' TE MadMoney
At what RPM/speed? Tell us more about the new wheel!!
Anthony Warren
1999 28' TE MadMoney
- Tree
- Gold Member
- Posts: 1611
- Joined: Fri Mar 22, 2013 12:28 pm
- Home Port: Portsmouth, UK
- Location: Bordon, UK
- Contact:
Re: fuel burn Albin 30fc
20.5 x 19.5 with no cup. Developed over the past eight years with Clements engineering here in the U.K. WOT is just shy of 26 knots and cruise is between 18-19 at 3300 rpm. Larger surface contact area on the blades and I can achieve 4000rpm on the yanmar tach with zero black smoke.
Apologies for hijacking the thread but I could imagine the 30FC could achieve similar results.
Apologies for hijacking the thread but I could imagine the 30FC could achieve similar results.
Fisher Price 2
Hull Number AUL28489L900
Yanmar 6LP-STE
Built in Portsmouth RI, USA - Berthed in Portsmouth Hampshire, United Kingdom.
Hull Number AUL28489L900
Yanmar 6LP-STE
Built in Portsmouth RI, USA - Berthed in Portsmouth Hampshire, United Kingdom.
- GSSeattle
- Gold Member
- Posts: 125
- Joined: Fri Nov 15, 2019 3:37 pm
- Home Port: Anacortes Marina (Anacortes, WA)
- Location: Seattle
Re: fuel burn Albin 30fc
Ummm, does Clements ship to the US? I'm only getting 1.8 NM/Gal cruising at 15 KN at 3600 RPM with the 6LP on my 28 engine box, 19x9 4 blade, full tanks 2 people. That would be quite an improvement in both cruise speed and fuel burn.Tree wrote: ↑Fri Jun 07, 2024 2:20 pm 20.5 x 19.5 with no cup. Developed over the past eight years with Clements engineering here in the U.K. WOT is just shy of 26 knots and cruise is between 18-19 at 3300 rpm. Larger surface contact area on the blades and I can achieve 4000rpm on the yanmar tach with zero black smoke.
Apologies for hijacking the thread but I could imagine the 30FC could achieve similar results.
Greg
2000 Albin 28 TE "Turtle Express"
2000 Albin 28 TE "Turtle Express"
- Tree
- Gold Member
- Posts: 1611
- Joined: Fri Mar 22, 2013 12:28 pm
- Home Port: Portsmouth, UK
- Location: Bordon, UK
- Contact:
Re: fuel burn Albin 30fc
If you contact Clements, ask for Paul. Mention Lee with Fisher Price 2 and I’m sure they would ship to the US. I can always talk with him if you’re serious?GSSeattle wrote: ↑Fri Jun 07, 2024 3:22 pmUmmm, does Clements ship to the US? I'm only getting 1.8 NM/Gal cruising at 15 KN at 3600 RPM with the 6LP on my 28 engine box, 19x9 4 blade, full tanks 2 people. That would be quite an improvement in both cruise speed and fuel burn.Tree wrote: ↑Fri Jun 07, 2024 2:20 pm 20.5 x 19.5 with no cup. Developed over the past eight years with Clements engineering here in the U.K. WOT is just shy of 26 knots and cruise is between 18-19 at 3300 rpm. Larger surface contact area on the blades and I can achieve 4000rpm on the yanmar tach with zero black smoke.
Apologies for hijacking the thread but I could imagine the 30FC could achieve similar results.
Fisher Price 2
Hull Number AUL28489L900
Yanmar 6LP-STE
Built in Portsmouth RI, USA - Berthed in Portsmouth Hampshire, United Kingdom.
Hull Number AUL28489L900
Yanmar 6LP-STE
Built in Portsmouth RI, USA - Berthed in Portsmouth Hampshire, United Kingdom.
- GSSeattle
- Gold Member
- Posts: 125
- Joined: Fri Nov 15, 2019 3:37 pm
- Home Port: Anacortes Marina (Anacortes, WA)
- Location: Seattle
Re: fuel burn Albin 30fc
Awesome, thanks. I'll probably contact them in the off season. Just did a haulout and quite a bit of improvements this year... Prop likely next year.
Greg
2000 Albin 28 TE "Turtle Express"
2000 Albin 28 TE "Turtle Express"
-
- Gold Member
- Posts: 1861
- Joined: Thu Apr 23, 2009 8:41 pm
- Home Port: Lake Champlain
Re: fuel burn Albin 30fc
GSSeattle, I'm sure there are good prop shops on the west coast. On the east coast, I highly recommend AccuTech Marine Propeller in Dover, NH. https://accutechmarine.com/. They've done outstanding work for us and others.
Nancy
2005 Albin 35CB
Yanmar 6LYA-STP 370
Valentine
Former boats
1995 Albin 28TE, Cummins 6BTA5.9 250, 2012-2022
1978 Trojan F32, 1998-2012
1983 Grady White 241 Weekender, 1988-1997
1980 Wellcraft 192 Classic, 1983-1987
2005 Albin 35CB
Yanmar 6LYA-STP 370
Valentine
Former boats
1995 Albin 28TE, Cummins 6BTA5.9 250, 2012-2022
1978 Trojan F32, 1998-2012
1983 Grady White 241 Weekender, 1988-1997
1980 Wellcraft 192 Classic, 1983-1987
- GSSeattle
- Gold Member
- Posts: 125
- Joined: Fri Nov 15, 2019 3:37 pm
- Home Port: Anacortes Marina (Anacortes, WA)
- Location: Seattle
Re: fuel burn Albin 30fc
Thanks Nancy. Yes, we've got some great prop shops around, but the numbers Tree is reporting for that prop are way better than I've seen on this forum for 28s with the Yanmar. Really piqued my interest
Greg
2000 Albin 28 TE "Turtle Express"
2000 Albin 28 TE "Turtle Express"