Plugging along with project. Couldn’t find the outlet for the wiring of the pre-wired washdown switch on the helm switches. I ran a new duplex 10awg probably overkill but if you read enough forums about boat wiring if you don’t run 10 for everything you are going to burn your boat down
. Ran the wiring for the livewell pump and future underwater lights from a 3 gang panel with nothing in it? at the helm just aft of the throttle.
Mounted the livewell fill on the transom side. Used a Shureflo with on/off control to make sure it doesn’t fill when not in use. Not sure at 19kts it will do anything though.
Unfortunately I think purchased and mounted an inlet instead of outlet for the washdown. May in future switch out but will get a male to male attachment for now. (Still have the console off my aquasport and have first charter on May 20).
Still need to get a stand pipe for the livewell - wondering if anyone else has one or knows what one is best/will fit.
You do not have the required permissions to view the files attached to this post. To view images, please register for a free account.