• Welcome to https://albinowners.net, the new home of Albin Owners Group!
• You will need to log in here, and you may want to bookmark this site. If you don't remember your password, use the I forgot my password link to reset it.
• All content has been transferred from our previous site.
• Contact Us if you have any questions or notice a problem. If you're not receiving our email, include a phone number where we can text you.
• You will need to log in here, and you may want to bookmark this site. If you don't remember your password, use the I forgot my password link to reset it.
• All content has been transferred from our previous site.
• Contact Us if you have any questions or notice a problem. If you're not receiving our email, include a phone number where we can text you.
FAQ:
• Membership information
• Burgees
• How to post photos
• Membership information
• Burgees
• How to post photos
Float switch replacement on 28TE engine box.
-
JimCoughlin
- Gold Member
- Posts: 27
- Joined: Sun Mar 24, 2019 2:40 pm
- Home Port: Cape Cod
Float switch replacement on 28TE engine box.
I need to replace the float switch for the aft bilge pump on my 97 engine box. It took a while to find it. Access is terrible behind the Beast. The only way I can think of is to remove the engine box cover hinges to get in there. Any suggestions?
-
Norseman
- Gold Member
- Posts: 1710
- Joined: Mon Jul 13, 2015 10:58 am
- Home Port: Palm Coast, Florida
- Location: Marina del Palma
- Contact:
Re: Float switch replacement on 28TE engine box.
See this thread, May 13th 2019.
Got the old switch out and managed to install a new and improved version.
For details, the see this Albin Owners thread and look for postings dated May 13th 2019 or thereabouts.
viewtopic.php?f=5&t=10612
Got the old switch out and managed to install a new and improved version.
For details, the see this Albin Owners thread and look for postings dated May 13th 2019 or thereabouts.
viewtopic.php?f=5&t=10612
2001 28TE, 6LP-STE, 1,337 hrs, 19X18 four-blade wheel.