• Welcome to https://albinowners.net, the new home of Albin Owners Group!
• You will need to log in here, and you may want to bookmark this site. If you don't remember your password, use the I forgot my password link to reset it.
• All content has been transferred from our previous site.
• Contact Us if you have any questions or notice a problem. If you're not receiving our email, include a phone number where we can text you.
• You will need to log in here, and you may want to bookmark this site. If you don't remember your password, use the I forgot my password link to reset it.
• All content has been transferred from our previous site.
• Contact Us if you have any questions or notice a problem. If you're not receiving our email, include a phone number where we can text you.
FAQ:
• Membership information
• Burgees
• How to post photos
• Membership information
• Burgees
• How to post photos
Beast to Yanmar
-
mamumurphy
- First Mate
- Posts: 20
- Joined: Sat Apr 13, 2019 6:16 pm
- Home Port: Stonington, CT
Beast to Yanmar
Has anyone out there refitted an older Albin 28 with an engine box and a Peninsula "Beast", with a new Yanmar 315? Wondering the approximate cost? I know the cost of the engine and transmission, but I'm sure it would need different electronics and controls. Have no idea of a total cost with install. Has anyone done that?
-
Norseman
- Gold Member
- Posts: 1710
- Joined: Mon Jul 13, 2015 10:58 am
- Home Port: Palm Coast, Florida
- Location: Marina del Palma
- Contact:
Re: Beast to Yanmar
Not sure, but I thought the 6LP(A)-STE(P) series were outlawed as they no longer meet the emission requirements..?
A new 310 HP Volvo May be a legal replacement.
A new 310 HP Volvo May be a legal replacement.
2001 28TE, 6LP-STE, 1,337 hrs, 19X18 four-blade wheel.
-
Sisu22
- Gold Member
- Posts: 312
- Joined: Sun May 07, 2017 6:50 pm
- Home Port: Ventura, CA
Re: Beast to Yanmar
I think that's probably right - but isn't it a state-by-state rule?
1994 TE 28' w/ Cummins 250
-
Norseman
- Gold Member
- Posts: 1710
- Joined: Mon Jul 13, 2015 10:58 am
- Home Port: Palm Coast, Florida
- Location: Marina del Palma
- Contact:
Re: Beast to Yanmar
Not sure, but believe it is a Federal requirement.
Saw a YouTube video recently where a shop had to destroy/crush Yanmar 6LP blocks to make them unusable and how much force it took to crush ‘em.
https://youtu.be/Kjy6mULtn0s
2001 28TE, 6LP-STE, 1,337 hrs, 19X18 four-blade wheel.