• Welcome to https://albinowners.net, the new home of Albin Owners Group!
• You will need to log in here, and you may want to bookmark this site. If you don't remember your password, use the I forgot my password link to reset it.
• All content has been transferred from our previous site.
Contact Us if you have any questions or notice a problem. If you're not receiving our email, include a phone number where we can text you.

salt water to fresh water head conversion

Engines, Electric, Plumbing, etc.

Moderator: Jeremyvmd

Post Reply
johngus
First Mate
First Mate
Posts: 35
Joined: Sun Jul 12, 2020 7:07 am
Home Port: amity harbor NY

salt water to fresh water head conversion

Post by johngus »

I see some have converted to fresh water to fill the head.i figure just have to move the hose to draw from the fresh water tank.i have a jabsco manual pump head that currently draws from the seacock .any ideas from anyone that may have done this?
Wfmdfm
Gold Member
Gold Member
Posts: 49
Joined: Fri Aug 16, 2019 10:10 pm
Home Port: Wareham ma

Re: salt water to fresh water head conversion

Post by Wfmdfm »

I have just finished that project. Block off the saltwater feed. Plum in the freshwater from your pressurized system. Need to run a electric feed to a new installed switch and then to the new toilet. The electric should be like number 12 to a dedicated breaker. I also decided to change up some of the wast hoses as well. Went from 1.5 inches down to 1 inch.
2000 28 TE Yanmar 300 6LP-STE
Nancy
Gold Member
Gold Member
Posts: 1908
Joined: Thu Apr 23, 2009 8:41 pm
Home Port: Lake Champlain

Re: salt water to fresh water head conversion

Post by Nancy »

I don't know the specifics, and I hope someone will chime in here, but I'm 98% certain there's something you have to do to prevent backflow from the toilet to the fresh water tank. Yuck.
Nancy
2005 Albin 35CB
Yanmar 6LYA-STP 370
Valentine

Former boats
1995 Albin 28TE, Cummins 6BTA5.9 250, 2012-2022
1978 Trojan F32, 1998-2012
1983 Grady White 241 Weekender, 1988-1997
1980 Wellcraft 192 Classic, 1983-1987
User avatar
Pitou
Gold Member
Gold Member
Posts: 2091
Joined: Thu Feb 22, 2007 1:34 pm
Home Port: Gloucester, MA
Location: Essex, MA

Re: salt water to fresh water head conversion

Post by Pitou »

Nancy wrote: Mon Apr 12, 2021 8:55 pm I don't know the specifics, and I hope someone will chime in here, but I'm 98% certain there's something you have to do to prevent backflow from the toilet to the fresh water tank. Yuck.
Yes .. a "backflow preventer" needs to be installed in between head and fresh water supply. Many freshwater ready heads have one built in.
kevinS
>><<>>;>

Former Boats:

- 2006 31TE / Hull# 221
Cummins QSC 8.3 / 500 hp
December '13 - April '23

- 2002 / 28TE / Hull# 614
Cummins 6BTA 370 hp / Alaskan Bulkhead
April '04 ~ May '13
jms02050
Gold Member
Gold Member
Posts: 175
Joined: Mon Jul 21, 2008 4:24 pm

Re: salt water to fresh water head conversion

Post by jms02050 »

The Raritan Fresh Head that I installed includes the preventer and is a direct replacement for the Jabsco in terms of bolt pattern. So drop in the replacement head and tee a feed line into the fresh water system and you’ll be all set. Otherwise you must address the potential for back flow from the head contaminating your fresh water which poses a serious threat to your health.
Jim S.
2003 28 TE - Full Circle
Wfmdfm
Gold Member
Gold Member
Posts: 49
Joined: Fri Aug 16, 2019 10:10 pm
Home Port: Wareham ma

Re: salt water to fresh water head conversion

Post by Wfmdfm »

I just installed the Dometic 7120 freshwater electric flush. It has the backflo built into the unit. I went thru the parts diagram to make sure it was indeed there.
2000 28 TE Yanmar 300 6LP-STE
johngus
First Mate
First Mate
Posts: 35
Joined: Sun Jul 12, 2020 7:07 am
Home Port: amity harbor NY

Re: salt water to fresh water head conversion

Post by johngus »

So is it possible to convert the salt to fresh?I will install a backflow valve
The jabsco I have works fine just would like to get rid of the stinky ness of the salt
jashmen
Gold Member
Gold Member
Posts: 110
Joined: Fri Sep 28, 2018 11:02 am
Home Port: bayville, nj

Re: salt water to fresh water head conversion

Post by jashmen »

johngus wrote: Mon Apr 19, 2021 8:20 pm So is it possible to convert the salt to fresh?I will install a backflow valve
The jabsco I have works fine just would like to get rid of the stinky ness of the salt
Absolutely. As long as you have enough fresh water, it is the best option.
Post Reply

Return to “Albin Maintenance”