• Welcome to https://albinowners.net, the new home of Albin Owners Group!
• You will need to log in here, and you may want to bookmark this site. If you don't remember your password, use the I forgot my password link to reset it.
• All content has been transferred from our previous site.
• Contact Us if you have any questions or notice a problem. If you're not receiving our email, include a phone number where we can text you.
• You will need to log in here, and you may want to bookmark this site. If you don't remember your password, use the I forgot my password link to reset it.
• All content has been transferred from our previous site.
• Contact Us if you have any questions or notice a problem. If you're not receiving our email, include a phone number where we can text you.
FAQ:
• Membership information
• Burgees
• How to post photos
• Membership information
• Burgees
• How to post photos
Trolling Valve
-
- First Mate
- Posts: 53
- Joined: Thu Dec 06, 2018 4:12 pm
- Home Port: Rock Hall MD
Trolling Valve
I am looking to have a trolling valve installed. Anyone near the Maryland (Rock Hall) know where I can get this done? Also any feedback from anyone that has added one? Thanks. Just bought the 28te 2 weeks ago and cant catch a fish at 3.5
Also need a rocket launcher made if you know anyone.
Also need a rocket launcher made if you know anyone.
-
- Gold Member
- Posts: 61
- Joined: Thu Nov 21, 2013 12:33 pm
- Home Port: Monterey, CA
Re: Trolling Valve
My 28 has a trolling valve that works very well allowing trolling speed in calm seas of down to 1.5 knots. On the West Coast they're common when trolling for salmon. Can't help you where to find one in Maryland. Best of luck.
Darryl
"Terry Lee II"
1999 28TE 6LP
Engine box / Trailer
Monterey, CA
"Terry Lee II"
1999 28TE 6LP
Engine box / Trailer
Monterey, CA
-
- Gold Member
- Posts: 86
- Joined: Thu Jun 24, 2010 9:16 pm
- Home Port: Saint Joseph Michigan, Pier 33
Re: Trolling Valve
Larry, I use drift socks to get my TE 28 down to 2.0 - 2.5 MPH, works well in most cases.
Alan
2008 28 Albin TE NE
Valkyrie
St. Joseph MI.
Hull Number: AUL 28 942 H 708
2008 28 Albin TE NE
Valkyrie
St. Joseph MI.
Hull Number: AUL 28 942 H 708
- Pitou
- Gold Member
- Posts: 2091
- Joined: Thu Feb 22, 2007 1:34 pm
- Home Port: Gloucester, MA
- Location: Essex, MA
Re: Trolling Valve
I've added trolling valves to both my 28TE and again in my 31TE. Depending on tide, wind etc., I can get the troll down to 1.2 - 1.5 knots .. perfect for striper trolling the tube & worm with lead core.
On the 28 I just used a simple T-handle push pull cable, but on the 31 I stepped up the program with a very smooth CableCraft Micro Adjustable control cable. This cable also has a twist lock on it "Hold" so that it can be firmly set once it's dialed in. I highly recommend the CableCraft.
Also, be sure to take advantage of the trolling valve safety switch and wire a big red light to your helm area as a reminder of when the valve is engaged.
On the 28 I just used a simple T-handle push pull cable, but on the 31 I stepped up the program with a very smooth CableCraft Micro Adjustable control cable. This cable also has a twist lock on it "Hold" so that it can be firmly set once it's dialed in. I highly recommend the CableCraft.
Also, be sure to take advantage of the trolling valve safety switch and wire a big red light to your helm area as a reminder of when the valve is engaged.
You do not have the required permissions to view the files attached to this post. To view images, please register for a free account.
kevinS
>><<>>;>
Former Boats:
- 2006 31TE / Hull# 221
Cummins QSC 8.3 / 500 hp
December '13 - April '23
- 2002 / 28TE / Hull# 614
Cummins 6BTA 370 hp / Alaskan Bulkhead
April '04 ~ May '13
>><<>>;>
Former Boats:
- 2006 31TE / Hull# 221
Cummins QSC 8.3 / 500 hp
December '13 - April '23
- 2002 / 28TE / Hull# 614
Cummins 6BTA 370 hp / Alaskan Bulkhead
April '04 ~ May '13
-
- First Mate
- Posts: 53
- Joined: Thu Dec 06, 2018 4:12 pm
- Home Port: Rock Hall MD
Re: Trolling Valve
Thanks Do you know what trans you have? I have a ZF Hurth HSW 630 V1-1:55. Do you know how much it would cost to add one.
- furball
- Gold Member
- Posts: 352
- Joined: Sun Sep 16, 2007 8:51 am
- Home Port: Chester, Md
- Location: Castle Harbor Marina
- Contact:
Re: Trolling Valve
I have a ZF in a 31TE. About 900 for the valve and 8 hours labor. That included a little extra but it’s close.
Good luck
John
Good luck
John
Chief
2005 31TE
Cummins 450
Formerly,
Transition
2006 28TE
Yanmar 6LP
2005 31TE
Cummins 450
Formerly,
Transition
2006 28TE
Yanmar 6LP
-
- Gold Member
- Posts: 520
- Joined: Mon Aug 26, 2019 9:22 pm
- Home Port: Chestertown, MD
Re: Trolling Valve
Not sure if you found someone yet but I’m willing to bet that Haven Harbor in Rock Hall could do it
USCG 100 Ton Master
Current boat:
"New Classic"
2006 31TE / Hull# 221
Cummins QSC 8.3 / 500 hp
Previous boats:
2002 28 TE with 315 Yanmar “Hair Of The Dog”
Current boat:
"New Classic"
2006 31TE / Hull# 221
Cummins QSC 8.3 / 500 hp
Previous boats:
2002 28 TE with 315 Yanmar “Hair Of The Dog”
-
- First Mate
- Posts: 53
- Joined: Thu Dec 06, 2018 4:12 pm
- Home Port: Rock Hall MD
Re: Trolling Valve
Thanks. I did find someone but they wanted around $3000 that's to high for me.
- Pitou
- Gold Member
- Posts: 2091
- Joined: Thu Feb 22, 2007 1:34 pm
- Home Port: Gloucester, MA
- Location: Essex, MA
Re: Trolling Valve
$3,000 is a little rich for that job. $900 to $1,100 for the valve, a Cablecraft push pull cable about $150. Labor .. on my 28TE it took me (first timer & not a mechanic) about eight hours. On my 31TE .. basically the same drill and I added a red light to the dash. That install took me about 4 hours. An all in fair price should be in the $2,000 range.
kevinS
>><<>>;>
Former Boats:
- 2006 31TE / Hull# 221
Cummins QSC 8.3 / 500 hp
December '13 - April '23
- 2002 / 28TE / Hull# 614
Cummins 6BTA 370 hp / Alaskan Bulkhead
April '04 ~ May '13
>><<>>;>
Former Boats:
- 2006 31TE / Hull# 221
Cummins QSC 8.3 / 500 hp
December '13 - April '23
- 2002 / 28TE / Hull# 614
Cummins 6BTA 370 hp / Alaskan Bulkhead
April '04 ~ May '13