• Welcome to https://albinowners.net, the new home of Albin Owners Group!
• You will need to log in here, and you may want to bookmark this site. If you don't remember your password, use the I forgot my password link to reset it.
• All content has been transferred from our previous site.
• Contact Us if you have any questions or notice a problem. If you're not receiving our email, include a phone number where we can text you.
• You will need to log in here, and you may want to bookmark this site. If you don't remember your password, use the I forgot my password link to reset it.
• All content has been transferred from our previous site.
• Contact Us if you have any questions or notice a problem. If you're not receiving our email, include a phone number where we can text you.
FAQ:
• Membership information
• Burgees
• How to post photos
• Membership information
• Burgees
• How to post photos
Window Washer Pump location
-
- Gold Member
- Posts: 86
- Joined: Thu Jun 24, 2010 9:16 pm
- Home Port: Saint Joseph Michigan, Pier 33
Window Washer Pump location
Noticed my window washer fluid (water) is not working. Anybody know where the pump is located for it on a 28?
Alan
2008 28 Albin TE NE
Valkyrie
St. Joseph MI.
Hull Number: AUL 28 942 H 708
2008 28 Albin TE NE
Valkyrie
St. Joseph MI.
Hull Number: AUL 28 942 H 708
-
- Gold Member
- Posts: 11
- Joined: Mon Jan 18, 2016 10:55 am
- Home Port: Freeport, Maine
Re: Window Washer Pump location
I installed a school bus reservoir, which like all systems usually has the pump built into the container. So wherever you put the water, check it out.
- Sisu22
- Gold Member
- Posts: 312
- Joined: Sun May 07, 2017 6:50 pm
- Home Port: Ventura, CA
Re: Window Washer Pump location
I don't have one. Would be interested to see how / where people installed one (or where the factory did so).
1994 TE 28' w/ Cummins 250
-
- Gold Member
- Posts: 81
- Joined: Wed Oct 18, 2017 1:54 am
- Home Port: Southern California
Re: Window Washer Pump location
Mine is installed under the bathroom sink.
Tom u
Tom u
-
- First Mate
- Posts: 106
- Joined: Mon Aug 29, 2016 12:28 pm
- Home Port: Falmouth, Maine
- Location: Scarborough, Maine
Re: Window Washer Pump location
I believe mine is just controlled by a solenoid off the fresh water system. Fresh water pump has to be turned on to run. Works pretty well.
You do not have the required permissions to view the files attached to this post. To view images, please register for a free account.
2003 Albin 28 TE Flush Deck "Isla" (Formerly "Dogonit")
- JackK
- Gold Member
- Posts: 465
- Joined: Fri Jun 30, 2006 8:14 am
- Home Port: Portsmouth, Rhode Island
- Location: Plainville, MA
Re: Window Washer Pump location
Yes it is I had the Vetus Washer system installed after getting tired of running up on the bow with a bucket of fresh water to get the salt off while drift fishing.
Jack
former boat .. 2003 28 TE Flushdeck Dogonit
- Sisu22
- Gold Member
- Posts: 312
- Joined: Sun May 07, 2017 6:50 pm
- Home Port: Ventura, CA
Re: Window Washer Pump location
Very nice... is that picture the inside of the radar arch?
1994 TE 28' w/ Cummins 250
- Pitou
- Gold Member
- Posts: 2091
- Joined: Thu Feb 22, 2007 1:34 pm
- Home Port: Gloucester, MA
- Location: Essex, MA
Re: Window Washer Pump location
Jaredh & Jack, Thanks so much for the picture and clarification.
This is something that I've wanted to do for a very, very long time!
This is something that I've wanted to do for a very, very long time!
kevinS
>><<>>;>
Former Boats:
- 2006 31TE / Hull# 221
Cummins QSC 8.3 / 500 hp
December '13 - April '23
- 2002 / 28TE / Hull# 614
Cummins 6BTA 370 hp / Alaskan Bulkhead
April '04 ~ May '13
>><<>>;>
Former Boats:
- 2006 31TE / Hull# 221
Cummins QSC 8.3 / 500 hp
December '13 - April '23
- 2002 / 28TE / Hull# 614
Cummins 6BTA 370 hp / Alaskan Bulkhead
April '04 ~ May '13
- JackK
- Gold Member
- Posts: 465
- Joined: Fri Jun 30, 2006 8:14 am
- Home Port: Portsmouth, Rhode Island
- Location: Plainville, MA
Re: Window Washer Pump location
Rotate that photo 90 degrees clockwise The pilothouse window is at the bottom of the photo. This is the inside panel on the starboard side of the pilothouse. The metal plates are the backers for the Rupp Sidekick Outriggers.
former boat .. 2003 28 TE Flushdeck Dogonit
- Sisu22
- Gold Member
- Posts: 312
- Joined: Sun May 07, 2017 6:50 pm
- Home Port: Ventura, CA
Re: Window Washer Pump location
Got it. I have no such terminal block in my boat unfortunately!
1994 TE 28' w/ Cummins 250
-
- Gold Member
- Posts: 86
- Joined: Thu Jun 24, 2010 9:16 pm
- Home Port: Saint Joseph Michigan, Pier 33
Re: Window Washer Pump location
Well, the good news is that after hours of searchinig and removing panels, I found the pump solenoid behind my helm station storage cabinets, the bad news is that it was working just fine. Looking up to the window washer knob, I could see that one of the wires had come off the connection, cause seems to be factory installation and making the harness too tight. One hour later, and a lot of cursing trying to reach up into there, I extended the wire, reconnected it properly and my washers are back in action.
Alan
2008 28 Albin TE NE
Valkyrie
St. Joseph MI.
Hull Number: AUL 28 942 H 708
2008 28 Albin TE NE
Valkyrie
St. Joseph MI.
Hull Number: AUL 28 942 H 708
-
- Gold Member
- Posts: 28
- Joined: Sun May 27, 2018 11:24 am
- Home Port: Babylon, NY
Re: Window Washer Pump location
I was about to install a tank, pump and system but this looks like a great idea I jus need a solenoid.
"MAHALO"
31 Tournament Express
Hull#223
Twin 315 Yanmar 6lpa-stp
31 Tournament Express
Hull#223
Twin 315 Yanmar 6lpa-stp
-
- Gold Member
- Posts: 86
- Joined: Thu Jun 24, 2010 9:16 pm
- Home Port: Saint Joseph Michigan, Pier 33
Re: Window Washer Pump location
Mine works off a solenoid from the fresh water system as well, works great.
Alan
2008 28 Albin TE NE
Valkyrie
St. Joseph MI.
Hull Number: AUL 28 942 H 708
2008 28 Albin TE NE
Valkyrie
St. Joseph MI.
Hull Number: AUL 28 942 H 708