• Welcome to https://albinowners.net, the new home of Albin Owners Group!
• You will need to log in here, and you may want to bookmark this site. If you don't remember your password, use the I forgot my password link to reset it.
• All content has been transferred from our previous site.
• Contact Us if you have any questions or notice a problem. If you're not receiving our email, include a phone number where we can text you.
• You will need to log in here, and you may want to bookmark this site. If you don't remember your password, use the I forgot my password link to reset it.
• All content has been transferred from our previous site.
• Contact Us if you have any questions or notice a problem. If you're not receiving our email, include a phone number where we can text you.
FAQ:
• Membership information
• Burgees
• How to post photos
• Membership information
• Burgees
• How to post photos
waste seacock
Moderator: Jeremyvmd
-
- Gold Member
- Posts: 211
- Joined: Thu Jul 05, 2007 6:42 pm
waste seacock
how do i lock my overboard waste seacock the coast guard wants a lock of some sort on them
- catalina_mike
- Gold Member
- Posts: 721
- Joined: Mon Mar 09, 2015 11:20 am
- Home Port: Dana Point
Re: waste seacock
Wire tie the handle to a hoop. Mount something like this https://www.westmarinepro.com/buy/schae ... cordNum=18 to a piece of starboard and epoxy it to the hull and use a wiretye.
Silverton 2007 36C
Sold - Albin 1999 28TE
SSI Instructor 13937
SDI / TDI Instructor 18172
USCG 100 Ton near coastal
Sold - Albin 1999 28TE
SSI Instructor 13937
SDI / TDI Instructor 18172
USCG 100 Ton near coastal
- Serenity
- In Memorium
- Posts: 598
- Joined: Mon Dec 13, 2010 12:15 pm
- Home Port: East Islip Anglers, New York
- Location: Long Island
Re: waste seacock
My understanding is if the waste goes straight over board, when in use, then the sea cock should be secured as Mike stated. I would think all boats have a holding tank. In my situation, I go to a holding facility (lack of a better term) and can only be discharged via a macerator or a deck fitting to be used at a pump out facility. Do I still have to secure the discharge sea cock? In the past CG Auxiliary inspections as long as pump out can not be operated from the head, all was good.
Max
Serenity 98 28TE
East Islip, Long Island, New York
Serenity 98 28TE
East Islip, Long Island, New York
- Tree
- Gold Member
- Posts: 1615
- Joined: Fri Mar 22, 2013 12:28 pm
- Home Port: Portsmouth, UK
- Location: Bordon, UK
- Contact:
Re: waste seacock
I found something on mine during the summer while I was chasing a bad smell from the heads. I have two Y valves. One under the sink unit and one under the helm seat. No idea why, both are locked off in the open position from when I imported her.
Fisher Price 2
Hull Number AUL28489L900
Yanmar 6LP-STE
Built in Portsmouth RI, USA - Berthed in Portsmouth Hampshire, United Kingdom.
Hull Number AUL28489L900
Yanmar 6LP-STE
Built in Portsmouth RI, USA - Berthed in Portsmouth Hampshire, United Kingdom.
-
- Gold Member
- Posts: 772
- Joined: Tue Feb 27, 2007 6:14 am
- Home Port: Oxford, MD
- Location: Preston, MD
Re: waste seacock
zip tying the Y valves has gotten me through multiple coast guard inspections with the overboard thru hull simply closed. there are eyes provided on the Y valves for this purpose.
28TE "Kozy L"
"How U Albin"
"How U Albin"
- catalina_mike
- Gold Member
- Posts: 721
- Joined: Mon Mar 09, 2015 11:20 am
- Home Port: Dana Point
Re: waste seacock
Depends on who you get doing the inspection. No matter how the discharge leads to the sea or fresh water it needs to be locked. Direct from wye or massarator.Serenity wrote: ↑Fri Nov 09, 2018 4:26 pm My understanding is if the waste goes straight over board, when in use, then the sea cock should be secured as Mike stated. I would think all boats have a holding tank. In my situation, I go to a holding facility (lack of a better term) and can only be discharged via a macerator or a deck fitting to be used at a pump out facility. Do I still have to secure the discharge sea cock? In the past CG Auxiliary inspections as long as pump out can not be operated from the head, all was good.
Silverton 2007 36C
Sold - Albin 1999 28TE
SSI Instructor 13937
SDI / TDI Instructor 18172
USCG 100 Ton near coastal
Sold - Albin 1999 28TE
SSI Instructor 13937
SDI / TDI Instructor 18172
USCG 100 Ton near coastal
- Capt Brad
- First Mate
- Posts: 103
- Joined: Sat Jun 24, 2017 11:41 am
- Home Port: Mattapoisett Ma
Re: waste seacock
Mine also has two wye gates, one for head direct overboard, the othe goes from holding tank to either deck fitting or macerator pump overboard. Being antetiredmmaerchant shipmaster, There is no restriction for pumping sewage overboard once outside 3 nm unless you are a designated special area or mandated “ no discharge zone. I’m sure Albin set up these boats for offshore fisherman so they can stay out and dump sewage.
Capt Brad
Capt Brad
Capt Brad