• Welcome to https://albinowners.net, the new home of Albin Owners Group!
• You will need to log in here, and you may want to bookmark this site. If you don't remember your password, use the I forgot my password link to reset it.
• All content has been transferred from our previous site.
• Contact Us if you have any questions or notice a problem. If you're not receiving our email, include a phone number where we can text you.
• You will need to log in here, and you may want to bookmark this site. If you don't remember your password, use the I forgot my password link to reset it.
• All content has been transferred from our previous site.
• Contact Us if you have any questions or notice a problem. If you're not receiving our email, include a phone number where we can text you.
FAQ:
• Membership information
• Burgees
• How to post photos
• Membership information
• Burgees
• How to post photos
oil pressure gauge
-
- Gold Member
- Posts: 199
- Joined: Sun Aug 24, 2014 6:55 am
- Home Port: Saugatuck, Mi
oil pressure gauge
After the timing check and attempt to replace zincs.....I noticed that the oil pressure gauge was not "up" any degree while the engine was running.......any thoughts? gauge problem?....sending unit problem?>>>>(owner problem??).....appreciat your input.....
-
- Gold Member
- Posts: 199
- Joined: Sun Aug 24, 2014 6:55 am
- Home Port: Saugatuck, Mi
Re: oil pressure gauge
Discovered the problem.......the wires for the engine temp and the wires for the oil pressure were "switched"......just guessing, but it must have been from the time it was built........problem solved and cured...
-
- Gold Member
- Posts: 2285
- Joined: Wed Nov 13, 2013 10:48 am
- Home Port: Hood Canal, WA
Re: oil pressure gauge
Nice bit of sleuthing, there. So if the oil pressure gauge was not registering, what was the temp gauge doing? No need to answer, just the way my mind works.
-
- Gold Member
- Posts: 199
- Joined: Sun Aug 24, 2014 6:55 am
- Home Port: Saugatuck, Mi
Re: oil pressure gauge
The temp gauge was registering....around 130 as I recall...........last year, when I was underway the oil pressure gauge would move up......but, it was responding to increased temp........funny .......
-
- Swabby
- Posts: 2
- Joined: Sun May 20, 2018 8:50 pm
- Home Port: South River NJ
Re: oil pressure gauge
My oil PSI gauge reads 75 LBS at Idle and 25 at cruising speed. Is it possible for the gauge to be wired backwards?
-
- Gold Member
- Posts: 88
- Joined: Sat Jan 21, 2012 9:33 pm
- Home Port: Skerryvore , Ontario
- Location: Creemore, Ontario
Re: oil pressure gauge
My oil gauge problem was very high readings when cold. Put a manual gauge on engine today. All normal. New sender on order.
Russell