• Welcome to https://albinowners.net, the new home of Albin Owners Group!
• You will need to log in here, and you may want to bookmark this site. If you don't remember your password, use the I forgot my password link to reset it.
• All content has been transferred from our previous site.
Contact Us if you have any questions or notice a problem. If you're not receiving our email, include a phone number where we can text you.

oil pressure gauge

Post Reply
mjohnh
Gold Member
Gold Member
Posts: 199
Joined: Sun Aug 24, 2014 6:55 am
Home Port: Saugatuck, Mi

oil pressure gauge

Post by mjohnh »

After the timing check and attempt to replace zincs.....I noticed that the oil pressure gauge was not "up" any degree while the engine was running.......any thoughts? gauge problem?....sending unit problem?>>>>(owner problem??).....appreciat your input.....
mjohnh
Gold Member
Gold Member
Posts: 199
Joined: Sun Aug 24, 2014 6:55 am
Home Port: Saugatuck, Mi

Re: oil pressure gauge

Post by mjohnh »

Discovered the problem.......the wires for the engine temp and the wires for the oil pressure were "switched"......just guessing, but it must have been from the time it was built........problem solved and cured...
WillieC
Gold Member
Gold Member
Posts: 2281
Joined: Wed Nov 13, 2013 10:48 am
Home Port: Hood Canal, WA

Re: oil pressure gauge

Post by WillieC »

Nice bit of sleuthing, there. So if the oil pressure gauge was not registering, what was the temp gauge doing? No need to answer, just the way my mind works.
mjohnh
Gold Member
Gold Member
Posts: 199
Joined: Sun Aug 24, 2014 6:55 am
Home Port: Saugatuck, Mi

Re: oil pressure gauge

Post by mjohnh »

The temp gauge was registering....around 130 as I recall...........last year, when I was underway the oil pressure gauge would move up......but, it was responding to increased temp........funny .......
mmannboat
Swabby
Swabby
Posts: 2
Joined: Sun May 20, 2018 8:50 pm
Home Port: South River NJ

Re: oil pressure gauge

Post by mmannboat »

My oil PSI gauge reads 75 LBS at Idle and 25 at cruising speed. Is it possible for the gauge to be wired backwards?
jetter
Gold Member
Gold Member
Posts: 88
Joined: Sat Jan 21, 2012 9:33 pm
Home Port: Skerryvore , Ontario
Location: Creemore, Ontario

Re: oil pressure gauge

Post by jetter »

My oil gauge problem was very high readings when cold. Put a manual gauge on engine today. All normal. New sender on order.
Russell
Post Reply

Return to “Tournament Express 26-35”