• Welcome to https://albinowners.net, the new home of Albin Owners Group!
• You will need to log in here, and you may want to bookmark this site. If you don't remember your password, use the I forgot my password link to reset it.
• All content has been transferred from our previous site.
Contact Us if you have any questions or notice a problem. If you're not receiving our email, include a phone number where we can text you.

Boat Stands

Not model or forum specific.

Moderators: DougSea, RobS

Post Reply
User avatar
joe.baar
Gold Member
Gold Member
Posts: 240
Joined: Thu Sep 13, 2007 12:27 am
Home Port: Everett, WA
Location: Seattle, WA

Boat Stands

Post by joe.baar »

Looking ahead to a Spring haul-out. Is there any recommended number, brand or type, position under the hull, etc., of boat stands, or maybe an entirely different method of supporting the boat for a week or two? This is a 1995 28TE, to be transported by Travel-Lift for maybe 500 feet. Comments also appreciated about how this is "usually" done. I didn't turn up anything by using the site's search function. Thanks.
(former owners)
Joe Baar and Suzanne Lammers
1995 28TE "Liberty" 6LPA hull# 132
Ballard
User avatar
JackK
Gold Member
Gold Member
Posts: 465
Joined: Fri Jun 30, 2006 8:14 am
Home Port: Portsmouth, Rhode Island
Location: Plainville, MA

Post by JackK »

Here's a picture of my 28 on the hard deck. The yard used 6 stands but I honestly believe the two front one's were just insurance and not really doing anything.

Image

Jack
former boat .. 2003 28 TE Flushdeck Dogonit
User avatar
chiefrcd
Gold Member
Gold Member
Posts: 541
Joined: Mon Jun 19, 2006 10:29 am
Home Port: Deltaville, VA
Location: Deltaville Virginia
Contact:

Post by chiefrcd »

Maybe the middle ones aren't doing much. My marina uses 4 and they are where Jacks front and rear ones are. It's a lot of money riding on those jacks, I always let the pros at the marina do it..... and they are always chained together from side to side as well.
Albin 28TE "Southwind"
User avatar
Mariner
Gold Member
Gold Member
Posts: 1450
Joined: Mon Apr 17, 2006 11:18 am
Location: Gig Harbor, WA

Post by Mariner »

Yep, solid wooden blocks under the keel, and 4-6 jacks to keep it upright, always chained together. It's best if the jacks and blocks are placed at the sling points, since you know that this is where the boat was designed to be lifted from.

The keel takes the weight, the purpose of the jackstands is just to keep it from tipping over.

As chief suggested, most yards are very adept at doing this and will usually provide the blocks, jacks, and expertise as part of the haul-out fee.
Post Reply

Return to “General Discussion”