I just purchased an 83 27FC. She has been re-powered with an Isuzu C240 4cyl engine. The previous owner physically broke the engine kill switch (or button). Anyone have any idea what I can replace this with? It looks to be original to the boat. Being that the button or handle is gone, I don't even know what its supposed to look like. It has a red wire going to one terminal on the housing & a white wire to the other. The whole top of the switch is missing.
I was thinking of installing an industrial push/pull E-stop switch but I am uncertain of what the amp draw on the switch would be?
Any insight would be greatly appreciated.
• Welcome to https://albinowners.net, the new home of Albin Owners Group!
• You will need to log in here, and you may want to bookmark this site. If you don't remember your password, use the I forgot my password link to reset it.
• All content has been transferred from our previous site.
• Contact Us if you have any questions or notice a problem. If you're not receiving our email, include a phone number where we can text you.
• You will need to log in here, and you may want to bookmark this site. If you don't remember your password, use the I forgot my password link to reset it.
• All content has been transferred from our previous site.
• Contact Us if you have any questions or notice a problem. If you're not receiving our email, include a phone number where we can text you.
FAQ:
• Membership information
• Burgees
• How to post photos
• Membership information
• Burgees
• How to post photos
1983 27FC kill switch
Moderator: Jeremyvmd
-
ChrisP
- First Mate
- Posts: 27
- Joined: Wed Sep 27, 2017 6:17 am
- Home Port: Clinton Harbor, CT
1983 27FC kill switch
Chris
1983 A27 FC
"ANNIE H"
Isuzu C240
1983 A27 FC
"ANNIE H"
Isuzu C240