• Welcome to https://albinowners.net, the new home of Albin Owners Group!
• You will need to log in here, and you may want to bookmark this site. If you don't remember your password, use the I forgot my password link to reset it.
• All content has been transferred from our previous site.
Contact Us if you have any questions or notice a problem. If you're not receiving our email, include a phone number where we can text you.

Forum Change

Not model or forum specific.

Moderators: DougSea, RobS

Post Reply
whwells
Gold Member
Gold Member
Posts: 1230
Joined: Mon Dec 27, 2010 10:20 pm
Home Port: Anacortes Marina, Anacortes, Wa
Location: Trinidad, Ca.. & Tahoe Vista, Ca.

Forum Change

Post by whwells »

John or Doug? It takes a little getting use too. However, change is good for the forum and all. Well done I like the result.
Howard
User avatar
jcollins
In Memorium
Posts: 4927
Joined: Sun Apr 16, 2006 9:05 pm
Home Port: Baltimore
Location: Seneca Creek Marina
Contact:

Re: Forum Change

Post by jcollins »

whwells wrote: Tue Apr 25, 2017 9:21 pm John or Doug? It takes a little getting use too. However, change is good for the forum and all. Well done I like the result.
Howard
Thanks Howard.
John
Former - 28 TE Convertible"Afterglow"
dmorlo52
Gold Member
Gold Member
Posts: 69
Joined: Mon Dec 09, 2013 1:21 pm
Home Port: New London, CT
Location: Live in Waterford, CT

Re: Forum Change

Post by dmorlo52 »

Love the new format John. I think it is easier to use and looks classy.

Good Work

David and Annette
35 TE- Winedown
User avatar
DCatSea
Gold Member
Gold Member
Posts: 918
Joined: Wed Aug 20, 2014 9:53 pm
Home Port: Alexandria VA
Location: Alexandria VA

Re: Forum Change

Post by DCatSea »

Nuthin' to do with this Doug; all John's work. Really like the new format - easy to use, easy to read; good job.
Doug and Georgia
"Mazboot" - 1984 27 FC #142
Lehman 4D61
Tribe 9.5 yak
Jackson STAXX-11 yak
Alexandria City Marina - F-03
jetter
Gold Member
Gold Member
Posts: 88
Joined: Sat Jan 21, 2012 9:33 pm
Home Port: Skerryvore , Ontario
Location: Creemore, Ontario

Re: Forum Change

Post by jetter »

I like to new posts feature. Makes it easy to check on what is "trending"
Russell
WillieC
Gold Member
Gold Member
Posts: 2285
Joined: Wed Nov 13, 2013 10:48 am
Home Port: Hood Canal, WA

Re: Forum Change

Post by WillieC »

Quick comment. I usually access via my computer, but this week I am compelled to access via iPhone. My fat thumbs often hit the poster's name when I intending to go to the post, which is just above said UN. Prolly just me, but I remember that part of the driver for this revamp is for those who access mainly via smart(?) phones. A little separation might help?
User avatar
jcollins
In Memorium
Posts: 4927
Joined: Sun Apr 16, 2006 9:05 pm
Home Port: Baltimore
Location: Seneca Creek Marina
Contact:

Re: Forum Change

Post by jcollins »

WillieC wrote: Sat May 06, 2017 10:46 am Quick comment. I usually access via my computer, but this week I am compelled to access via iPhone. My fat thumbs often hit the poster's name when I intending to go to the post, which is just above said UN. Prolly just me, but I remember that part of the driver for this revamp is for those who access mainly via smart(?) phones. A little separation might help?
Thanks for your comments. All will be considered for future enhancements.
John
Former - 28 TE Convertible"Afterglow"
User avatar
Nepidae
Gold Member
Gold Member
Posts: 142
Joined: Mon Jun 11, 2012 7:33 am
Home Port: Essington, PA
Location: On the Loop

Re: Forum Change

Post by Nepidae »

It could be how my laptop is setup but the type goes far to the right and I need to use the slide bar at the bottom to view the entire message.

Any suggestions to get the page on a single 'sheet' so I don't need to slide the text back & forth?

Thanks.
Calm seas,

Charles

Jane & Charles Williamson
m/v Nepidae
Albin 43 Sundeck
Nepidae.trawler@gmail.com
MTOA-3927
AGLCA - 12114 (ret)
Currently: On the Loop
User avatar
jcollins
In Memorium
Posts: 4927
Joined: Sun Apr 16, 2006 9:05 pm
Home Port: Baltimore
Location: Seneca Creek Marina
Contact:

Re: Forum Change

Post by jcollins »

Nepidae wrote: Mon May 08, 2017 7:50 am It could be how my laptop is setup but the type goes far to the right and I need to use the slide bar at the bottom to view the entire message.

Any suggestions to get the page on a single 'sheet' so I don't need to slide the text back & forth?

Thanks.
If you are scrolling left/right to view a whole page it's possible your resolution is set low. If your less than or at 1024x768 you may need to increase the resolution. This will affect ALL browser pages, not just AOG. The downside is that your fonts will be smaller to allow the increase in resolution. If you need a larger font, you can always increase the page size by hitting Ctrl-+ (plus) or Ctrl-- (minus) to decrease. Ctrl-0 (zero) will reset to 100% (default)
For example, my resolution is set at 1920x1080 which is recommended for my laptop display.
John
Former - 28 TE Convertible"Afterglow"
User avatar
Russell
Gold Member
Gold Member
Posts: 831
Joined: Mon Oct 09, 2006 3:34 pm
Home Port: Stuart, FL
Location: Stuart, FL

Re: Forum Change

Post by Russell »

Just accessed this site on my phone and the new format is great. I'll be doing this much more often now. Thanks John
Russ
2005 Flush Deck
Honey Girl
Volvo D6-310
Stuart FL
User avatar
sail149
Gold Member
Gold Member
Posts: 344
Joined: Sun Nov 08, 2009 5:30 pm
Home Port: Stuck at home on trailer! Chesapeake bay intended....
Location: Eastern PA

Re: Forum Change

Post by sail149 »

John
The new format is defiantly cleaner but does seem to have less information.
Looking at the list of topic there used to be a date for the last post and who posted it . Good to know if anything new had been posted on a subject.
And the date of the posts is really faint , I've seen that on many forums is that changeable ?
Cheers for all your work with the forum
Warren
Warren
'84. 27AC. Lehman 4D61
User avatar
jcollins
In Memorium
Posts: 4927
Joined: Sun Apr 16, 2006 9:05 pm
Home Port: Baltimore
Location: Seneca Creek Marina
Contact:

Re: Forum Change

Post by jcollins »

sail149 wrote: Sat May 13, 2017 1:53 pm Looking at the list of topic there used to be a date for the last post and who posted it . Good to know if anything new had been posted on a subject.
And the date of the posts is really faint , I've seen that on many forums is that changeable ?
Warren
Warren,
Unless I'm misunderstanding, there is a most recent post date.
I know what you mean about the "faintness". I'll work on that.
John
Former - 28 TE Convertible"Afterglow"
User avatar
sail149
Gold Member
Gold Member
Posts: 344
Joined: Sun Nov 08, 2009 5:30 pm
Home Port: Stuck at home on trailer! Chesapeake bay intended....
Location: Eastern PA

Re: Forum Change

Post by sail149 »

Hi john,
I look at this pages like this
viewforum.php?f=28
To check if anything new has been posted before I look at the threads. It's here where I think there used to be a date of most recent post in each thread.
Thanks a lot
Warren
Warren
'84. 27AC. Lehman 4D61
User avatar
jcollins
In Memorium
Posts: 4927
Joined: Sun Apr 16, 2006 9:05 pm
Home Port: Baltimore
Location: Seneca Creek Marina
Contact:

Re: Forum Change

Post by jcollins »

sail149 wrote: Sun May 14, 2017 10:54 am Hi john,
I look at this pages like this
viewforum.php?f=28
To check if anything new has been posted before I look at the threads. It's here where I think there used to be a date of most recent post in each thread.
Thanks a lot
Warren
Try using "quicklinks" (top left) and checking "Notifications" (top right)
1.png
2.png
You do not have the required permissions to view the files attached to this post. To view images, please register for a free account.
John
Former - 28 TE Convertible"Afterglow"
WillieC
Gold Member
Gold Member
Posts: 2285
Joined: Wed Nov 13, 2013 10:48 am
Home Port: Hood Canal, WA

Re: Forum Change

Post by WillieC »

I find myself using the quick links esp. the New Posts tab. And as John suggest, the Notifications on the top right. I think a notification is that someone has posted to one of your original threads. Someday I hope to read all the FAQs, but these two serve me very well. Nancy first pointed out the Quick Links so I understood it. Thanks all.
Post Reply

Return to “General Discussion”