• Welcome to https://albinowners.net, the new home of Albin Owners Group!
• You will need to log in here, and you may want to bookmark this site. If you don't remember your password, use the I forgot my password link to reset it.
• All content has been transferred from our previous site.
• Contact Us if you have any questions or notice a problem. If you're not receiving our email, include a phone number where we can text you.
• You will need to log in here, and you may want to bookmark this site. If you don't remember your password, use the I forgot my password link to reset it.
• All content has been transferred from our previous site.
• Contact Us if you have any questions or notice a problem. If you're not receiving our email, include a phone number where we can text you.
FAQ:
• Membership information
• Burgees
• How to post photos
• Membership information
• Burgees
• How to post photos
forward bilge pump on Albin 28 TE
Moderator: Jeremyvmd
-
- Swabby
- Posts: 1
- Joined: Tue Feb 14, 2017 6:09 am
- Home Port: Delray Beach, FL
forward bilge pump on Albin 28 TE
Suggestions on mounting a bilge pump under cabin floor.
-
- Gold Member
- Posts: 1043
- Joined: Mon Aug 10, 2015 11:17 am
- Home Port: Waretown nj
Re: forward bilge pump on Albin 28 TE
I drilled very shallow holes into the bottom of the boat and mounted a rule 900 low profile pump into the space. I prob only drilled 3/16 into the solid glass portion right at the keel. still sealed the heck out of it to be safe. probably should have bonded a strip of wood with 5200 and screwed to that. My boat had an existing pump there that was not attached to anything, so I didn't have to run a new hose.
1989 Viking 45C “Knot Crazy”
1998 Albin 28te "Shady Lady" *sold*
1999 seagull nautico 19 "Purrrspective" *sold*
Native watercraft prostaff
1998 Albin 28te "Shady Lady" *sold*
1999 seagull nautico 19 "Purrrspective" *sold*
Native watercraft prostaff
-
- Gold Member
- Posts: 152
- Joined: Mon Sep 28, 2015 5:23 pm
- Home Port: san diego
Re: forward bilge pump on Albin 28 TE
Do this: cut and glass a piece of plywood to fit the hull shape at the battery shelf. Use 4200 and seal it in place. This will stop all water from flowing forward of the battery shelf. Use a low profile bilge pump at the now sealed in bulk head as this will be your low point. Wire it to run on auto and your bilge will always be dry. No need for any bilge water in the cabin.
- Serenity
- In Memorium
- Posts: 598
- Joined: Mon Dec 13, 2010 12:15 pm
- Home Port: East Islip Anglers, New York
- Location: Long Island
Re: forward bilge pump on Albin 28 TE
Does the shower drain into your bilge into a sump pump or drains straight out overboard? It maybe possible to tap into the shower drain hose and pump out overboard that way. On my 98- 28TE I have both a sump pump for the shower and a forward bilge pump. Both pumps came with the boat new. The bilge pump is located forward of the sump pump and has its own discharge hose. If I ever have the displeasure of taking on a massive amount of water, I would want as many bilge pumps on hand to perform. Based on design, my 28 has a tendency to collect water forward. However, once underway the water flows aft and I turn on the aft pumps. We are not talking a lot of water. The biggest problem is water gets into the bilge via the rod holders. I use the rubber caps that are used on the bottom of canes to plug up the rod holders while I am not underway.
Max
Serenity 98 28TE
East Islip, Long Island, New York
Serenity 98 28TE
East Islip, Long Island, New York
-
- Gold Member
- Posts: 1043
- Joined: Mon Aug 10, 2015 11:17 am
- Home Port: Waretown nj
Re: forward bilge pump on Albin 28 TE
As someone who has collected uncomfortable amounts of water in an Albin. There is no such thing as too many or too powerful bilge pumps, but u gotta maintain them and their hoses!
1989 Viking 45C “Knot Crazy”
1998 Albin 28te "Shady Lady" *sold*
1999 seagull nautico 19 "Purrrspective" *sold*
Native watercraft prostaff
1998 Albin 28te "Shady Lady" *sold*
1999 seagull nautico 19 "Purrrspective" *sold*
Native watercraft prostaff
-
- Gold Member
- Posts: 152
- Joined: Mon Sep 28, 2015 5:23 pm
- Home Port: san diego
Re: forward bilge pump on Albin 28 TE
Agreed on the pumps. I have one under the cabin floor but block the water from going forward. If I ever needed it, it's there.