• Welcome to https://albinowners.net, the new home of Albin Owners Group!
• You will need to log in here, and you may want to bookmark this site. If you don't remember your password, use the I forgot my password link to reset it.
• All content has been transferred from our previous site.
Contact Us if you have any questions or notice a problem. If you're not receiving our email, include a phone number where we can text you.

Engine Air Intake Splash Guard

Engines, Electric, Plumbing, etc.

Moderator: Jeremyvmd

Post Reply
User avatar
SJR
Gold Member
Gold Member
Posts: 64
Joined: Fri Oct 25, 2013 3:05 pm
Home Port: Long Beach NY
Location: Long Beach, NY

Engine Air Intake Splash Guard

Post by SJR »

Was looking to find if anyone had any info or direction as to where to find a replacement for a broken splash guard. This would be (on my 31TE) on the inside of the Engine Air intake, an angled plastic piece that prevents water from pouring, splashing into the engine room. Picture of one is attached. During rough seas on my port side broke leaving the engine covered and subsequent issues including damaged throttle , shorted air heater etc. Any help would be appreciated as always.

thanks SJR
You do not have the required permissions to view the files attached to this post. To view images, please register for a free account.
TEAGAN II
2006 31' TE
Twin Yanmar 315HP 6-LPAM STP
User avatar
RobS
Gold Member
Gold Member
Posts: 4041
Joined: Wed Oct 03, 2007 6:20 am
Home Port: Center Moriches, NY
Contact:

Re: Engine Air Intake Splash Guard

Post by RobS »

Pretty sure Vetus makes a dorade box for that vent but if it were me, especially with the off season fast approaching, I'd take it off and make up a better stronger version in starboard.

Here's the link to the Vetus products..

http://www.vetus-shop.com/vetus-dorade- ... 3_277.html
Rob S.
"TENACIOUS"
1974 Chris Craft 36' Commander Tournament
Cummins 6BTA 330B's

(Former Owner)
"TOY-RIFIC" 2000 28TE, 6LP, Hull 408

Luck is the residue of good design.
User avatar
SJR
Gold Member
Gold Member
Posts: 64
Joined: Fri Oct 25, 2013 3:05 pm
Home Port: Long Beach NY
Location: Long Beach, NY

Re: Engine Air Intake Splash Guard

Post by SJR »

thanks you, thats excacty what the shop had said, these boxes should be a little stronger and higher. thanks again Rob
TEAGAN II
2006 31' TE
Twin Yanmar 315HP 6-LPAM STP
User avatar
Pitou
Gold Member
Gold Member
Posts: 2091
Joined: Thu Feb 22, 2007 1:34 pm
Home Port: Gloucester, MA
Location: Essex, MA

Re: Engine Air Intake Splash Guard

Post by Pitou »

I picked up one of the original boxes / splash guards on closeout last summer at Hamilton Marine for short money ($25) for a spare just in case mine ever cracked. This summer it did. Those originals, also by Vetus, sure are delicate. Thanks for posting the new replacements Rob. I just might order the newer version fo comparison.
kevinS
>><<>>;>

Former Boats:

- 2006 31TE / Hull# 221
Cummins QSC 8.3 / 500 hp
December '13 - April '23

- 2002 / 28TE / Hull# 614
Cummins 6BTA 370 hp / Alaskan Bulkhead
April '04 ~ May '13
User avatar
SJR
Gold Member
Gold Member
Posts: 64
Joined: Fri Oct 25, 2013 3:05 pm
Home Port: Long Beach NY
Location: Long Beach, NY

Re: Engine Air Intake Splash Guard

Post by SJR »

Thanks Kevin
TEAGAN II
2006 31' TE
Twin Yanmar 315HP 6-LPAM STP
User avatar
SJR
Gold Member
Gold Member
Posts: 64
Joined: Fri Oct 25, 2013 3:05 pm
Home Port: Long Beach NY
Location: Long Beach, NY

Re: Engine Air Intake Splash Guard

Post by SJR »

For any future Albin Owners' reference : Real easy fix and worth a preemptive replacement versus the cost of a possible failure in rough weather.
You do not have the required permissions to view the files attached to this post. To view images, please register for a free account.
TEAGAN II
2006 31' TE
Twin Yanmar 315HP 6-LPAM STP
User avatar
Pitou
Gold Member
Gold Member
Posts: 2091
Joined: Thu Feb 22, 2007 1:34 pm
Home Port: Gloucester, MA
Location: Essex, MA

Re: Engine Air Intake Splash Guard

Post by Pitou »

Looks good and thanks for the pictures .. As they say, pictures are worth a thousand words!

For comparison, what do you think of the new box .. higher & stronger?
kevinS
>><<>>;>

Former Boats:

- 2006 31TE / Hull# 221
Cummins QSC 8.3 / 500 hp
December '13 - April '23

- 2002 / 28TE / Hull# 614
Cummins 6BTA 370 hp / Alaskan Bulkhead
April '04 ~ May '13
User avatar
SJR
Gold Member
Gold Member
Posts: 64
Joined: Fri Oct 25, 2013 3:05 pm
Home Port: Long Beach NY
Location: Long Beach, NY

Re: Engine Air Intake Splash Guard

Post by SJR »

Thanks. The new box is much better, whereas the old one was two if not three or four piece construction, the new ones are a one piece mold. While replacing the old one I also noticed that, not only did the top crack off, the bottom seem where the clear fiberglass meets the base was all split and allowing whatever water to run down the inside side of the boat. The top is also much more protected and more inclosed. I believe its a big improvement, I ordered another to replace the starboard side just to be safe.

***Vetus D-BOX 100 *** Fits 2006 31' Tournament Express

(thought this may be helpful, there are a ton of different sizes and they are measured by air flow)
TEAGAN II
2006 31' TE
Twin Yanmar 315HP 6-LPAM STP
Post Reply

Return to “Albin Maintenance”