Yanmar model for 97 28TE?

Post by **Neil** » Wed Nov 18, 2015 8:13 am

I apologize if this question has been asked before, I'm not finding it. What model yanmar diesel inboard is correct for a 97 28TE. Our beast runs fine, I'm just curious. Thanks for any help.

Post by **Jeremyvmd** » Wed Nov 18, 2015 9:50 am

Do you mean which one is in there now, or what would you use as a replacement?

Post by **Neil** » Wed Nov 18, 2015 11:19 am

What model would I use as a replacement if our Penninsular 300hp gave up.

Post by **Serenity** » Thu Nov 19, 2015 6:08 pm

The 28's have used the 315 hp, 6LP2. Some have used Cummins.

Post by **Neil** » Fri Nov 20, 2015 6:44 am

Terrific! Thanks for the help!
Neil

Post by **catalina_mike** » Fri Nov 20, 2015 11:28 am

If the beast exhaust is port side you will want to look for a Yanmar. I think the Cummins is Starboard side exhaust.

Post by **Jeremyvmd** » Fri Nov 20, 2015 11:56 am

Beast has the exhaust on the starboard side. Your better off replacing the beast with another peninsular.

Post by **Neil** » Sat Nov 21, 2015 7:30 am

I didn't realize the exhaust played into the decision , you guys are saving me a lot of time. I really appreciate it. If you ever have any wood related questions I'm happy to give back!

Post by **Serenity** » Sat Nov 21, 2015 11:53 am

Yanmar 315.jpg

My Albin was repowered from the beast to the Yanmar 315 in 09. My exhaust goes out the starboard side. From the mixing elbow (on the port side of the engine) they ran about 6-7 feet of exhaust hose out to the outlet on the starboard side.

Post by **catalina_mike** » Sat Nov 21, 2015 2:26 pm

I think the key is if you can get the the gradual fall and not trap water until the muffler no worries... I'm glad someone got it to work and fit!

Post by **Neil** » Sat Nov 21, 2015 3:10 pm

Oooooooo she is a looker! You could eat off that engine it's so clean! Engine envy. Thanks for the info from you both, big help

Post by **Tree** » Sat Nov 21, 2015 4:18 pm

Max, I can't tell from the picture but do you have a different air filter on there from standard? It almost looks like a K&N filter?

Post by **catalina_mike** » Sat Nov 21, 2015 4:19 pm

Mine is not as clean but i love the Yanmar..

http://photo.pacificwestcontrols.com/~M ... 322e4a5047

Post by **rcwhite** » Sat Nov 21, 2015 7:13 pm

Last I knew the 6lp installed is no longer available. F

Post by **rcwhite** » Sat Nov 21, 2015 7:16 pm

To finish what my phone submitted without permission...

There was a period where Yanmar didn't have a compatible model available. This was a couple of years ago so I suspect things have changed since then.

Albin Owners Group

Albin Owners Group

Yanmar model for 97 28TE?

Yanmar model for 97 28TE?

Re: Yanmar model for 97 28TE?

Re: Yanmar model for 97 28TE?

Re: Yanmar model for 97 28TE?

Re: Yanmar model for 97 28TE?

Re: Yanmar model for 97 28TE?

Re: Yanmar model for 97 28TE?

Re: Yanmar model for 97 28TE?

Re: Yanmar model for 97 28TE?

Re: Yanmar model for 97 28TE?

Re: Yanmar model for 97 28TE?

Re: Yanmar model for 97 28TE?

Re: Yanmar model for 97 28TE?

Re: Yanmar model for 97 28TE?

Re: Yanmar model for 97 28TE?