• Welcome to https://albinowners.net, the new home of Albin Owners Group!
• You will need to log in here, and you may want to bookmark this site. If you don't remember your password, use the I forgot my password link to reset it.
• All content has been transferred from our previous site.
• Contact Us if you have any questions or notice a problem. If you're not receiving our email, include a phone number where we can text you.
• You will need to log in here, and you may want to bookmark this site. If you don't remember your password, use the I forgot my password link to reset it.
• All content has been transferred from our previous site.
• Contact Us if you have any questions or notice a problem. If you're not receiving our email, include a phone number where we can text you.
FAQ:
• Membership information
• Burgees
• How to post photos
• Membership information
• Burgees
• How to post photos
fc /w/ 157 isuzu prop size
-
captlarryd
- Deckhand
- Posts: 6
- Joined: Wed Nov 20, 2013 9:50 am
- Home Port: Vermilion, Oh
fc /w/ 157 isuzu prop size
My recently purchased 1988 has a 18" od x 22" pitch prop. Max wot is 2200 rpm and making lots of black smoke. Speed around 11-12 kts. I suspect I am seriously over propped and would like to know what other owners have in the way of prop size. trans is Hurth 2.2:1. Also is it necessary to drop rudder to remove prop shaft?
-
sail149
- Gold Member
- Posts: 344
- Joined: Sun Nov 08, 2009 5:30 pm
- Home Port: Stuck at home on trailer! Chesapeake bay intended....
- Location: Eastern PA
Re: fc /w/ 157 isuzu prop size
Check out this site
If not posted they probably know ( or the orriginal owner)
http://dejardine.com/page11/page11.html
They mention running the engine 3400-4000rpm and no smoke
Warren
If not posted they probably know ( or the orriginal owner)
http://dejardine.com/page11/page11.html
They mention running the engine 3400-4000rpm and no smoke
Warren
Warren
'84. 27AC. Lehman 4D61
'84. 27AC. Lehman 4D61