Hi-
Just bot 2002 28 TE ("Odyssey") and made an uneventful passage Anacortes to Anderson Island (So. Puget Sound) via Kingston. Sorry I missed the Kingston gathering this weekend!
There are NO facilities available on Anderson Island, but, that's home. Any suggestions regarding these great boats will be much appreciated.
Bob and Ann Ingham
• Welcome to https://albinowners.net, the new home of Albin Owners Group!
• You will need to log in here, and you may want to bookmark this site. If you don't remember your password, use the I forgot my password link to reset it.
• All content has been transferred from our previous site.
• Contact Us if you have any questions or notice a problem. If you're not receiving our email, include a phone number where we can text you.
• You will need to log in here, and you may want to bookmark this site. If you don't remember your password, use the I forgot my password link to reset it.
• All content has been transferred from our previous site.
• Contact Us if you have any questions or notice a problem. If you're not receiving our email, include a phone number where we can text you.
FAQ:
• Membership information
• Burgees
• How to post photos
• Membership information
• Burgees
• How to post photos
New Owner/New Member
-
- Swabby
- Posts: 2
- Joined: Sun Jul 19, 2015 10:40 pm
- Home Port: Anderson Island, WA
-
- Gold Member
- Posts: 1230
- Joined: Mon Dec 27, 2010 10:20 pm
- Home Port: Anacortes Marina, Anacortes, Wa
- Location: Trinidad, Ca.. & Tahoe Vista, Ca.
Re: New Owner/New Member
Congra's on the purchase. Assume this is that fine boat with the Volvo 330 from Bellingham Yachts. We will all look forward to your joining up with the PNWG next year. Usually there is a planning meet after the Seattle Boat Show. Watch for the posting.
whwells "Howard"
whwells "Howard"
-
- Swabby
- Posts: 2
- Joined: Sun Jul 19, 2015 10:40 pm
- Home Port: Anderson Island, WA
Re: New Owner/New Member
Actually, this is the 2002 boat that's been on the hard in Anacortes the past 2? years with 315 Yanmar. The Bellingham Yachts boat with the flat deck design just didn't fit our needs. Look forward to your boat show get-together
-
- Gold Member
- Posts: 215
- Joined: Tue Aug 15, 2006 8:56 pm
- Location: Tampa Bay
Re: New Owner/New Member
In the 2002 -2004 era the 315hp Yanmar engine had valve sleeve problems and there was a recall. The serial numbers of the engines involved were between #50101 and #53988.
If your engine falls into the recall category make sure that the engine has been upgraded. Perhaps the previous owner(s) attended to this issue if it had been known to him/them. Unfortunately, the Yanmar recall program has expired.
I believe that there is more information on this Albin site. Use of the search function should aid in locating it.
Hopefully, your engine is one not involved in the recall or if it was, the problem has been addressed...
Happy researching,
If your engine falls into the recall category make sure that the engine has been upgraded. Perhaps the previous owner(s) attended to this issue if it had been known to him/them. Unfortunately, the Yanmar recall program has expired.
I believe that there is more information on this Albin site. Use of the search function should aid in locating it.
Hopefully, your engine is one not involved in the recall or if it was, the problem has been addressed...
Happy researching,
Joe
Albin Getaway
"LabTime"
Albin Getaway
"LabTime"
-
- Gold Member
- Posts: 1230
- Joined: Mon Dec 27, 2010 10:20 pm
- Home Port: Anacortes Marina, Anacortes, Wa
- Location: Trinidad, Ca.. & Tahoe Vista, Ca.
Re: New Owner/New Member
Odyssey: There were two 28te on the hard for awhile. They are on my evening walk when at the Anacortes Marina Docks.
One had the GM engine and the other the Yanmar. If you purchased the Yanmar be really certain the timing belts has been changed,
The recommendation is 6 years or1200 hours which ever occurs first. Many try the 1,000-1200 hours without regard to time. That can be a big mistake.
whwells "Howard"
One had the GM engine and the other the Yanmar. If you purchased the Yanmar be really certain the timing belts has been changed,
The recommendation is 6 years or1200 hours which ever occurs first. Many try the 1,000-1200 hours without regard to time. That can be a big mistake.
whwells "Howard"