• Welcome to https://albinowners.net, the new home of Albin Owners Group!
• You will need to log in here, and you may want to bookmark this site. If you don't remember your password, use the I forgot my password link to reset it.
• All content has been transferred from our previous site.
• Contact Us if you have any questions or notice a problem. If you're not receiving our email, include a phone number where we can text you.
• You will need to log in here, and you may want to bookmark this site. If you don't remember your password, use the I forgot my password link to reset it.
• All content has been transferred from our previous site.
• Contact Us if you have any questions or notice a problem. If you're not receiving our email, include a phone number where we can text you.
FAQ:
• Membership information
• Burgees
• How to post photos
• Membership information
• Burgees
• How to post photos
new helm seat
Moderator: Jeremyvmd
-
- Gold Member
- Posts: 211
- Joined: Thu Jul 05, 2007 6:42 pm
new helm seat
I am looking for a new helm seat for my 28 te any suggestions would help me out greatly also where I can buy one?
- RobS
- Gold Member
- Posts: 4044
- Joined: Wed Oct 03, 2007 6:20 am
- Home Port: Center Moriches, NY
- Contact:
Re: new helm seat
That's a very general inquiry. Are you trying to match something or looking for an upgrade ?
Rob S.
"TENACIOUS"
1974 Chris Craft 36' Commander Tournament
Cummins 6BTA 330B's
(Former Owner)
"TOY-RIFIC" 2000 28TE, 6LP, Hull 408
Luck is the residue of good design.
"TENACIOUS"
1974 Chris Craft 36' Commander Tournament
Cummins 6BTA 330B's
(Former Owner)
"TOY-RIFIC" 2000 28TE, 6LP, Hull 408
Luck is the residue of good design.
-
- Gold Member
- Posts: 211
- Joined: Thu Jul 05, 2007 6:42 pm
Re: new helm seat
Sorry Rob I am looking to upgrade my helm seat the one that came on my 02 28 te has very little back support
- Pitou
- Gold Member
- Posts: 2091
- Joined: Thu Feb 22, 2007 1:34 pm
- Home Port: Gloucester, MA
- Location: Essex, MA
Re: new helm seat
kevinS
>><<>>;>
Former Boats:
- 2006 31TE / Hull# 221
Cummins QSC 8.3 / 500 hp
December '13 - April '23
- 2002 / 28TE / Hull# 614
Cummins 6BTA 370 hp / Alaskan Bulkhead
April '04 ~ May '13
>><<>>;>
Former Boats:
- 2006 31TE / Hull# 221
Cummins QSC 8.3 / 500 hp
December '13 - April '23
- 2002 / 28TE / Hull# 614
Cummins 6BTA 370 hp / Alaskan Bulkhead
April '04 ~ May '13
-
- Gold Member
- Posts: 192
- Joined: Fri Sep 10, 2010 2:01 pm
- Home Port: Essex CT
Re: new helm seat
See my post in "General inquiries: swivel seat" dated April 3 2013. I replaced mine. They are bigger and better back support but being bigger, the captain's seat does not swivel 360 degrees. Check the screws on any seat you buy. They don't always tighten them sufficiently in the factories.
-
- Gold Member
- Posts: 95
- Joined: Wed Jun 11, 2014 7:29 am
- Home Port: Northport
Re: new helm seat
I replaced mine with a Bentley Rivermaster. Great seat with back support. Bought it through go2marine.com
With headrest $750. Looked at Lebrock and Stidd $$$$$$.
With headrest $750. Looked at Lebrock and Stidd $$$$$$.
SeaQuel
1997 31TE
3126 Cat
Formally
Abbastanza
2000 Albin 28 TE
Joe F
1997 31TE
3126 Cat
Formally
Abbastanza
2000 Albin 28 TE
Joe F
- Robb
- Gold Member
- Posts: 83
- Joined: Mon Oct 31, 2011 2:44 pm
- Home Port: Tacoma, WA
Re: new helm seat
I installed a pair of Tempress High backs in my 28 last year. They do not swivel 360 but are much more comfortable. I thought they were a good value on sale at $225. Here is the spec.
http://www.westmarine.com/buy/west-mari ... 40_002_525
http://www.westmarine.com/buy/west-mari ... 40_002_525
Robb Stilnovich
"Stella Maris" 1996 28TE #279
Cummins 6BTA-370
Tacoma, WA
"Stella Maris" 1996 28TE #279
Cummins 6BTA-370
Tacoma, WA
-
- Gold Member
- Posts: 211
- Joined: Thu Jul 05, 2007 6:42 pm
Re: new helm seat
rob did you have to buy a new mounting plate or use the one off the old seat if so what mounting plate and other materials did you go with?
- Robb
- Gold Member
- Posts: 83
- Joined: Mon Oct 31, 2011 2:44 pm
- Home Port: Tacoma, WA
Re: new helm seat
Used the existing mounting plate- bolted right up.
Robb Stilnovich
"Stella Maris" 1996 28TE #279
Cummins 6BTA-370
Tacoma, WA
"Stella Maris" 1996 28TE #279
Cummins 6BTA-370
Tacoma, WA
-
- Gold Member
- Posts: 211
- Joined: Thu Jul 05, 2007 6:42 pm
Re: new helm seat
Thanks Rob
-
- Gold Member
- Posts: 211
- Joined: Thu Jul 05, 2007 6:42 pm
Re: new helm seat
Rob did you have to move your foot rest up with the new seat my feet do not reach it now