• Welcome to https://albinowners.net, the new home of Albin Owners Group!
• You will need to log in here, and you may want to bookmark this site. If you don't remember your password, use the I forgot my password link to reset it.
• All content has been transferred from our previous site.
Contact Us if you have any questions or notice a problem. If you're not receiving our email, include a phone number where we can text you.

Volvo Diesel and Hull Surveyor

Not model or forum specific.

Moderators: DougSea, RobS

Post Reply
whwells
Gold Member
Gold Member
Posts: 1230
Joined: Mon Dec 27, 2010 10:20 pm
Home Port: Anacortes Marina, Anacortes, Wa
Location: Trinidad, Ca.. & Tahoe Vista, Ca.

Volvo Diesel and Hull Surveyor

Post by whwells »

Looking for honest surveyor near Brooklyn, New York for Volvo Diesel Engine. Any thoughts
whwells "Howard"
bobm
Gold Member
Gold Member
Posts: 27
Joined: Sat Nov 02, 2013 12:01 am
Home Port: Savannah, GA.

Re: Volvo Diesel and Hull Surveyor

Post by bobm »

Get a Volvo Certified Dealer to check over the engine. Require that they connect the EVC (engine controller) to their Vodia Software tool to see any past or present fault codes. They should also use the software to do an electronic test, similar to a compression test, to test each cylinder seperately and compare the readings of all cylinders. They should be able to give you good information about the engine condition. This would be an engine survey to augment the general survey of the boat.

Bob M
whwells
Gold Member
Gold Member
Posts: 1230
Joined: Mon Dec 27, 2010 10:20 pm
Home Port: Anacortes Marina, Anacortes, Wa
Location: Trinidad, Ca.. & Tahoe Vista, Ca.

Re: Volvo Diesel and Hull Surveyor

Post by whwells »

bobm: Thanks for the response. This one got away mostly because it was too far to transport.
whwells "Howard"
Post Reply

Return to “General Discussion”