Source of Hard enclosure to rear of wheelhouse

Low Country · Post by **Low Country** » Wed Mar 25, 2015 5:06 pm

Folks,
New Member and assuming Survey goes well new Albin 31 owner.

The boat has the soft enclosure. I would like to replace soft enclosure with the optional hard doors.
I am looking for a distributor/source.

As soon as I am an "official owner i will introduce myself in detail.

Thanks,
David M

Post by **johnmurray** » Thu Mar 26, 2015 6:12 pm

I own an Albin 30FC and I did some research into this issue a couple of years ago. As far as I was able to determine there was more than one company that manufactured and/or installed hard pilot house enclosures for Albin or as an after-market item. Someone told me the cost could be up to $10K. I did not try to arrange anything, in part because I live in Canada and would have to move the boat to the location of a US installer.
One company that does this kind of work and according to their website has done Albin installations is ALUMINUM 2000. You can Google it.

Post by **Pitou** » Thu Mar 26, 2015 9:50 pm

Hoping all works out for you.

John is correct. Aluminium 2000 a division of Pompanette out of NH. They built the Alaskan bulkhead enclosure on my 28 and the double doors on my present 31 TE.

Low Country · Post by **Low Country** » Fri Mar 27, 2015 8:46 am

Thank You
Good Stuff.
If the weather cooperates Survey will be next week.
I will keep you posted.
Dave

Post by **Pitou** » Fri Mar 27, 2015 9:02 am

Low Country wrote:Thank You
Good Stuff.
If the weather cooperates Survey will be next week.
I will keep you posted.
Dave

Here's your link:

http://www.aluminum2000.com/about.html

Albin Owners Group

Albin Owners Group

Source of Hard enclosure to rear of wheelhouse

Source of Hard enclosure to rear of wheelhouse

Re: Source of Hard enclosure to rear of wheelhouse

Re: Source of Hard enclosure to rear of wheelhouse

Re: Source of Hard enclosure to rear of wheelhouse

Re: Source of Hard enclosure to rear of wheelhouse