• Welcome to https://albinowners.net, the new home of Albin Owners Group!
• You will need to log in here, and you may want to bookmark this site. If you don't remember your password, use the I forgot my password link to reset it.
• All content has been transferred from our previous site.
Contact Us if you have any questions or notice a problem. If you're not receiving our email, include a phone number where we can text you.

On Board Tool Set & Spares

Engines, Electric, Plumbing, etc.

Moderator: Jeremyvmd

Post Reply
User avatar
SJR
Gold Member
Gold Member
Posts: 64
Joined: Fri Oct 25, 2013 3:05 pm
Home Port: Long Beach NY
Location: Long Beach, NY

On Board Tool Set & Spares

Post by SJR »

Recently moved from outboards to a Twin Inboard, I was wondering if anyone could advise on a proper list for on board tool set, and or preferences. Also wondering any advise on spare parts to keep on hand and/or on board for twin 315 Yanmars. Many thanks in advance.
TEAGAN II
2006 31' TE
Twin Yanmar 315HP 6-LPAM STP
elad

Re: On Board Tool Set & Spares

Post by elad »

Do you mean for day to day use or extended cruising?
User avatar
SJR
Gold Member
Gold Member
Posts: 64
Joined: Fri Oct 25, 2013 3:05 pm
Home Port: Long Beach NY
Location: Long Beach, NY

Re: On Board Tool Set & Spares

Post by SJR »

Looking to a have a permanent set on board. I've always kept the bare minimum basics on my previous boat, just wondering if someone had a proper list that may be a good reference. I plan on overnighters offshore and 1-2 week trips on a 31 TE+2.
TEAGAN II
2006 31' TE
Twin Yanmar 315HP 6-LPAM STP
coolchange
Gold Member
Gold Member
Posts: 222
Joined: Sun Jul 07, 2013 11:23 am
Home Port: Portland Oregon

Re: On Board Tool Set & Spares

Post by coolchange »

beer can opener, extra tonic, matches, rolling papers....should do it.
1989 Albin 27 FC w/ Isuzu 157 hp, Ford 6.0 Diesel, giant trailer
6th, and most favorite boat yet
Cruising: Columbia River Portland to Bar, San Juans, Gulf Islands,
Desolation Sound, Sunshine Coast, Broughton Islands
jleonard
Gold Member
Gold Member
Posts: 2115
Joined: Fri Sep 22, 2006 7:35 am
Home Port: Mystic, CT
Location: New Port Richey, FL

Re: On Board Tool Set & Spares

Post by jleonard »

What engines?
Formerly
1983 40 Albin trunk cabin
Attitude Adjustment
Mystic, CT
User avatar
mudskipper
Gold Member
Gold Member
Posts: 95
Joined: Fri Jul 23, 2010 7:17 am

Re: On Board Tool Set & Spares

Post by mudskipper »

Oh no a "lefty"
User avatar
Pitou
Gold Member
Gold Member
Posts: 2091
Joined: Thu Feb 22, 2007 1:34 pm
Home Port: Gloucester, MA
Location: Essex, MA

Re: On Board Tool Set & Spares

Post by Pitou »

SJR wrote:Looking to a have a permanent set on board. I've always kept the bare minimum basics on my previous boat, just wondering if someone had a proper list that may be a good reference. I plan on overnighters offshore and 1-2 week trips on a 31 TE+2.
Here are some basics:

Engines: Spare fuel filters for your Racor and on engine FF, water pump impellers, oil, coolant /same for gen-set. Some wil carry a spare belt.
Bow Thruster: shear pin & fuse / most likely you will never need them.
Running / Masthead lights: spare bulbs
Back-up VHF handheld
A good safety kit including a radar reflector
SeaTow or Boat US Membership Card

Welcome aboard!
kevinS
>><<>>;>

Former Boats:

- 2006 31TE / Hull# 221
Cummins QSC 8.3 / 500 hp
December '13 - April '23

- 2002 / 28TE / Hull# 614
Cummins 6BTA 370 hp / Alaskan Bulkhead
April '04 ~ May '13
Jack
Gold Member
Gold Member
Posts: 192
Joined: Fri Sep 10, 2010 2:01 pm
Home Port: Essex CT

Re: On Board Tool Set & Spares

Post by Jack »

In addition to tools consider hose clamps of varied sizes, fuses, light bulbs and a funnel. Duct tape might help too.
User avatar
Tree
Gold Member
Gold Member
Posts: 1613
Joined: Fri Mar 22, 2013 12:28 pm
Home Port: Portsmouth, UK
Location: Bordon, UK
Contact:

Re: On Board Tool Set & Spares

Post by Tree »

Jack wrote:In addition to tools consider hose clamps of varied sizes, fuses, light bulbs and a funnel. Duct tape might help too.

Not sure if we have the same item or description is different but electrical tape is a must I find (also good for repairing fishing rod rings in an emergency) and also amalgamating tape just incase you ever have a hose failure.

I also carry a roll of spanners, metric and imperial - a basic socket set, screwdrivers and a gas powered soldering iron.
Fisher Price 2
Hull Number AUL28489L900
Yanmar 6LP-STE
Built in Portsmouth RI, USA - Berthed in Portsmouth Hampshire, United Kingdom.
User avatar
SJR
Gold Member
Gold Member
Posts: 64
Joined: Fri Oct 25, 2013 3:05 pm
Home Port: Long Beach NY
Location: Long Beach, NY

Re: On Board Tool Set & Spares

Post by SJR »

Thanks all, good info and appreciated.

@Jleonard I have twin Yanmars 6-LPAM STP (315 HP)

thanks Kevin S, Pitou, I also have 06' 31TE home port is Long Beach NY.
TEAGAN II
2006 31' TE
Twin Yanmar 315HP 6-LPAM STP
User avatar
RobS
Gold Member
Gold Member
Posts: 4044
Joined: Wed Oct 03, 2007 6:20 am
Home Port: Center Moriches, NY
Contact:

Re: On Board Tool Set & Spares

Post by RobS »

Safety earphones. One check of the engine while underway and you'll see why they are needed. Checking the engine before you fire up and leave the dock is good, but periodic inspections while underway are just as, or perhaps more, important. Or in the unfortunate event you have to tend to something down below while underway..
Rob S.
"TENACIOUS"
1974 Chris Craft 36' Commander Tournament
Cummins 6BTA 330B's

(Former Owner)
"TOY-RIFIC" 2000 28TE, 6LP, Hull 408

Luck is the residue of good design.
User avatar
SJR
Gold Member
Gold Member
Posts: 64
Joined: Fri Oct 25, 2013 3:05 pm
Home Port: Long Beach NY
Location: Long Beach, NY

Re: On Board Tool Set & Spares

Post by SJR »

Thanks Rob
TEAGAN II
2006 31' TE
Twin Yanmar 315HP 6-LPAM STP
hetek
Gold Member
Gold Member
Posts: 719
Joined: Sat Mar 27, 2010 5:42 pm
Home Port: Southold, NY
Location: Eastern Long Island, NY

Re: On Board Tool Set & Spares

Post by hetek »

RobS wrote:Safety earphones. One check of the engine while underway and you'll see why they are needed. Checking the engine before you fire up and leave the dock is good, but periodic inspections while underway are just as, or perhaps more, important. Or in the unfortunate event you have to tend to something down below while underway..
Ditto on this one!

Checking for that elusive drip of fluid that only occurs when the engine is running... You will definitely need these!

I keep mine right in the glove box next to the helm.
Jon B.
Former owner of...
"Bunkie" - a 1984 A27FC
New owner of...
1977 A25 deLuxe - a work in progress
User avatar
Farmer38
Gold Member
Gold Member
Posts: 71
Joined: Sun Sep 14, 2014 6:56 pm
Home Port: St Petersburg, FL
Location: St Petersburg, FL
Contact:

Re: On Board Tool Set & Spares

Post by Farmer38 »

Here is the list I culled from the excellent suggestions above - getting ready for my first week cruise on a new to me boat - Any adds?

Suggested Spare Parts List

Engines
Fuel filters for your Racor
On-engine fuel filter
Water pump impellers
Oil
Coolant
Spare belts

Gen-Set
Spare fuel filters for your Racor and
On engine Fuel Filter
Water pump impellers
Oil
Coolant
Spare belt

Spare fluid for the steering helm - Use a clean ketchup/mustard squeeze bottle for filling.

Bow Thruster
Shear pin & fuse / most likely you will never need them

Running / Masthead Lights
Spare bulbs

Tools
Carry a roll of spanners - metric and imperial
Basic socket set
Screwdrivers
Gas powered soldering iron
Multi-meter
Wire terminal kit and crimpers
Inspection mirror
Safety earphones. One check of the engine while underway and you'll see why they are needed.

Misc.
SeaTow or Boat US Membership Card
Check USCG Safety Kit (flare dates all good?) and First Aid Kit (anybody use up supplies?)
Back-up VHF handheld
Fresh Batteries
Rechargeable led light (better than a reg battery flashlight)
Radar reflector
Hose clamps of varied sizes
Fuses
Light bulbs
Spare wire of varied sizes
Appropriate sized funnel(s)
Manuals if available
Jumper cables
1quart or gallon of fresh clean diesel (in case you need to top off the Racor)
An small plastic bucket and empty container in case you need to change fuel filters
WD40 or your equivalent

Tape
Duct tape
Electrical tape
Amalgamating tape (just in case you ever have a hose failure)
Last edited by Farmer38 on Wed Nov 12, 2014 11:38 am, edited 3 times in total.
Jim & Deserie

2000 32+2 Island Waters
12' Flex Boat RIB
St Petersburg, FL
jleonard
Gold Member
Gold Member
Posts: 2115
Joined: Fri Sep 22, 2006 7:35 am
Home Port: Mystic, CT
Location: New Port Richey, FL

Re: On Board Tool Set & Spares

Post by jleonard »

I would add
Wire terminal kit and crimpers
Rechargeable led light (better than a reg battery flashlight)
Inspection mirror
Spare fluid for the steering helm
Manuals if available
Jumper cables
1quart or gallon of fresh clean diesel (in case you need to top off the Racor)
An small plastic bucket and empty container in case you need to change fuel filters
Appropriate sized funnel(s)
WD40 or your equivalent
Formerly
1983 40 Albin trunk cabin
Attitude Adjustment
Mystic, CT
Post Reply

Return to “Albin Maintenance”