• Welcome to https://albinowners.net, the new home of Albin Owners Group!
• You will need to log in here, and you may want to bookmark this site. If you don't remember your password, use the I forgot my password link to reset it.
• All content has been transferred from our previous site.
• Contact Us if you have any questions or notice a problem. If you're not receiving our email, include a phone number where we can text you.
• You will need to log in here, and you may want to bookmark this site. If you don't remember your password, use the I forgot my password link to reset it.
• All content has been transferred from our previous site.
• Contact Us if you have any questions or notice a problem. If you're not receiving our email, include a phone number where we can text you.
FAQ:
• Membership information
• Burgees
• How to post photos
• Membership information
• Burgees
• How to post photos
Keel cored or solid?
Moderator: Jeremyvmd
-
marshotel
- Deckhand
- Posts: 6
- Joined: Wed Sep 12, 2012 8:47 am
- Home Port: Mystic, CT
Keel cored or solid?
My question is about the keel just below where the cutlass bearing housing mounts. On the curve below the housing a couple inches down, there was a small puncture about the diameter of a pencil that I patched with a resin before putting in this spring. I had the boat (albin 36) pulled last week for other reasons and noticed the patch was leaking water from it. I want to grind out and repair this weekend. Does anyone know how the bottom of the keel is constructed? Thanks