• Welcome to https://albinowners.net, home of Albin Owners Group!
• If you don't remember your password, use the I forgot my password link to reset it.
• Contact Us if you have any questions. If you're not receiving our email, include a phone number where we can text you.
	• If you don't remember your password, use the I forgot my password link to reset it.
• Contact Us if you have any questions. If you're not receiving our email, include a phone number where we can text you.
FAQ:
• Membership information
• Burgees
• How to post photos
	• Membership information
• Burgees
• How to post photos
Seized seacock
- amber jj
 - Gold Member

 - Posts: 282
 - Joined: Tue Sep 13, 2011 5:03 pm
 - Boat Make/Model (or None): 2000 31TE twin 370 Cummins
 - Home Port: Turkey Point ont. canada
 - Location: Dundas Ont.Can.
 
Seized seacock
The seacock for the macerator discharge through the hull is frozen open.Any ideas of how I can free it up while the boat is still in the water?Thanks Bob
			
			
									
						
										
						- DougSea
 - Gold Member

 - Posts: 2762
 - Joined: Tue Jun 13, 2006 9:45 am
 - Boat Make/Model (or None): Albin 35TE
 - Home Port: Safe Harbor - Essex Island Marina, Essex, CT
 - Location: Essex, Connecticut
 
Re: Seized seacock
Tap on it with a small hammer while using a short piece of pipe on the handle to increase your leverage.  If it will move at all try working it back and forth. Normally I'd also apply some heat (with a hairdryer, don't want to melt the seals) but with it full of water I don't think it would be very effective.
			
			
									
						
							Doug
Sonny IV
2006 35TE Convertible, Volvo D6-370's
Former owner - Sonny III, 1997 28TE with "The BEAST"
			
						Sonny IV
2006 35TE Convertible, Volvo D6-370's
Former owner - Sonny III, 1997 28TE with "The BEAST"
- amber jj
 - Gold Member

 - Posts: 282
 - Joined: Tue Sep 13, 2011 5:03 pm
 - Boat Make/Model (or None): 2000 31TE twin 370 Cummins
 - Home Port: Turkey Point ont. canada
 - Location: Dundas Ont.Can.
 
Re: Seized seacock
Thanks I will give it a try Saturday.We also reinstalled our Vanguard tachometers yesterday.We had the hour meters repaired.Now we will be able to keep our service records up to date.
			
			
									
						
										
						