2002 28TE Yanmar315 My RPM Gage is working on and off? Help

Post by **slimjim** » Wed Apr 17, 2013 2:07 pm

Had RPM gage up to 3200 and then it dropped to zero, Hour meter in gage still works fine. Sometimes the RPM gage works at start up and then nothing......looked at back of gage and all wires look okay? Anyone know what it could be? It works on and off, then on again. Thanks for any feedback...

Post by **RobS** » Wed Apr 17, 2013 4:17 pm

That's an easy one. Loose connection at the spade connectors at the flywheel sensor. Tighten by pulling them off, crushing them a bit with pliers and clean/spray the spades.

Post by **slimjim** » Wed Apr 17, 2013 10:58 pm

Thanks Rob, I will try that tomorrow and update on it, thanks so much!!!

Post by **slimjim** » Fri Apr 19, 2013 1:14 am

Rob, thanks sooo much thats what the problem was, clean them and put it back on and now my RPM gage works perfect. I would have never found the problem if not for this great web site and Rob. I have had a lot of help already in a very short time. Thanks again to everyone.

Albin Owners Group

Albin Owners Group

2002 28TE Yanmar315 My RPM Gage is working on and off? Help

2002 28TE Yanmar315 My RPM Gage is working on and off? Help

Re: 2002 28TE Yanmar315 My RPM Gage is working on and off? H

Re: 2002 28TE Yanmar315 My RPM Gage is working on and off? H

Re: 2002 28TE Yanmar315 My RPM Gage is working on and off? H