We're just getting to know our recently purchased 2004 28TE, and I'm flummoxed by the aftmost ventilation port beside the quarter berth. The shelf below the two ports seems to incline as it runs aft, and I don't see how I can pivot the aftmost port securing screw down to the clamping position as it's arc interferes with the run of the shelf. Is this a common problem? I am also having difficulty inserting the screens in these ports (without breaking the plastic edge). Anyone have a special technique?
Thanks,
Steve Foster
Snow Goose
Charlotte, VT
• Welcome to https://albinowners.net, the new home of Albin Owners Group!
• You will need to log in here, and you may want to bookmark this site. If you don't remember your password, use the I forgot my password link to reset it.
• All content has been transferred from our previous site.
• Contact Us if you have any questions or notice a problem. If you're not receiving our email, include a phone number where we can text you.
• You will need to log in here, and you may want to bookmark this site. If you don't remember your password, use the I forgot my password link to reset it.
• All content has been transferred from our previous site.
• Contact Us if you have any questions or notice a problem. If you're not receiving our email, include a phone number where we can text you.
FAQ:
• Membership information
• Burgees
• How to post photos
• Membership information
• Burgees
• How to post photos
Quarter berth port
-
Spfoster
- Gold Member
- Posts: 11
- Joined: Tue Mar 27, 2012 6:46 pm
- Home Port: Lake Champlain
-
RobS
- Gold Member
- Posts: 4044
- Joined: Wed Oct 03, 2007 6:20 am
- Home Port: Center Moriches, NY
- Contact:
Re: Quarter berth port
This must be on an Flush Deck, right? I know the qtr berth is different than on an engine box model.
Rob S.
"TENACIOUS"
1974 Chris Craft 36' Commander Tournament
Cummins 6BTA 330B's
(Former Owner)
"TOY-RIFIC" 2000 28TE, 6LP, Hull 408
Luck is the residue of good design.
"TENACIOUS"
1974 Chris Craft 36' Commander Tournament
Cummins 6BTA 330B's
(Former Owner)
"TOY-RIFIC" 2000 28TE, 6LP, Hull 408
Luck is the residue of good design.
-
Spfoster
- Gold Member
- Posts: 11
- Joined: Tue Mar 27, 2012 6:46 pm
- Home Port: Lake Champlain
Re: Quarter berth port
Hi Rob,
Yes, it's a flush deck.
Spfoster
Yes, it's a flush deck.
Spfoster
-
DougSea
- Gold Member
- Posts: 2762
- Joined: Tue Jun 13, 2006 9:45 am
- Home Port: Safe Harbor - Essex Island Marina, Essex, CT
- Location: Essex, Connecticut
Re: Quarter berth port
Can you post a picture?
Doug
Sonny IV
2006 35TE Convertible, Volvo D6-370's
Former owner - Sonny III, 1997 28TE with "The BEAST"
Sonny IV
2006 35TE Convertible, Volvo D6-370's
Former owner - Sonny III, 1997 28TE with "The BEAST"
-
Spfoster
- Gold Member
- Posts: 11
- Joined: Tue Mar 27, 2012 6:46 pm
- Home Port: Lake Champlain
Re: Quarter berth port
Thanks for responding, Doug. Sorry to say I don't possess the wherewithall to post a photo.
Spfoster
Spfoster
-
DougSea
- Gold Member
- Posts: 2762
- Joined: Tue Jun 13, 2006 9:45 am
- Home Port: Safe Harbor - Essex Island Marina, Essex, CT
- Location: Essex, Connecticut
Re: Quarter berth port
It's not too hard Steve,
Here's a link with instructions: viewtopic.php?f=9&t=1249
Let me know if you need any help.
Here's a link with instructions: viewtopic.php?f=9&t=1249
Let me know if you need any help.
Doug
Sonny IV
2006 35TE Convertible, Volvo D6-370's
Former owner - Sonny III, 1997 28TE with "The BEAST"
Sonny IV
2006 35TE Convertible, Volvo D6-370's
Former owner - Sonny III, 1997 28TE with "The BEAST"