• Welcome to https://albinowners.net, the new home of Albin Owners Group!
• You will need to log in here, and you may want to bookmark this site. If you don't remember your password, use the I forgot my password link to reset it.
• All content has been transferred from our previous site.
Contact Us if you have any questions or notice a problem. If you're not receiving our email, include a phone number where we can text you.

Engine cover struts

Engines, Electric, Plumbing, etc.

Moderator: Jeremyvmd

Post Reply
jo-bob
Swabby
Swabby
Posts: 2
Joined: Sun Jul 12, 2009 9:35 pm

Engine cover struts

Post by jo-bob »

I just repowered my 1998 Albin 28' TE from Penninsular to Yanmar. I decided to order new hatch struts from Spring Lift. After installing the new model SL25-30's I discovered that the stock pressure (30 lbs) was too low. Spring lift was very helpful and said they would increase the pressure if I mailed them back. does anyone know what that pressure should be? It can be pumped up to 180 lbs. Thanks, Bob on the North Fork of Long Island, NY.
User avatar
jcollins
In Memorium
Posts: 4927
Joined: Sun Apr 16, 2006 9:05 pm
Home Port: Baltimore
Location: Seneca Creek Marina
Contact:

Re: Engine cover struts

Post by jcollins »

jo-bob,
Welcome to AOG. Many of us have the Pensinsular engine and these are getting older.
What kind of problems did you have with the Peninsular? How many hours on the engine?
John
Former - 28 TE Convertible"Afterglow"
User avatar
RobS
Gold Member
Gold Member
Posts: 4044
Joined: Wed Oct 03, 2007 6:20 am
Home Port: Center Moriches, NY
Contact:

Re: Engine cover struts

Post by RobS »

jo-bob,
Do you still have one of the old ones. Are they operational - maybe you can send the news one back along with one of the old ones and they can match up the pressure/tension.

Where on the North Fork of LI are you?

BTW, there is a fireworks show at 3-Mile Harbor Sat night.
Rob S.
"TENACIOUS"
1974 Chris Craft 36' Commander Tournament
Cummins 6BTA 330B's

(Former Owner)
"TOY-RIFIC" 2000 28TE, 6LP, Hull 408

Luck is the residue of good design.
jo-bob
Swabby
Swabby
Posts: 2
Joined: Sun Jul 12, 2009 9:35 pm

Re: Engine cover struts

Post by jo-bob »

We had no major problems with the Peninsular since 1998. It had about 900 hours on it. Last summer it developed a number of issues including needing new pumps and oil coolers and turbo which was going to total about $8,000. Rather than put money into a questionable engine, I decided to replace it with a Yanmar 315. Repowering cost about $26,000 when all was said and done but I have no regrets. It is a totally different boat--more quiet, smooth, and faster. Starts immediately and is three to five knots faster and they tell me it will burn less fule.

With regard to the struts--Spring lift said that sending the old ones to get the pressure from them would not work. I reinstalled the old ones and they work fine but I have the new struts that can be pumped up if I know what pressure to use.

Happy boating
RWP
Gold Member
Gold Member
Posts: 25
Joined: Mon Feb 16, 2009 2:35 pm
Home Port: Saint Petersburg, FL
Location: St. Petersburg, FL

Re: Engine cover struts

Post by RWP »

Off topic, sorry...but you should be tickled pink with a repower cost of $26K. I also have a '98 model and did the very same thing. The engine and transmission alone were about $23K and labor plus other parts brought the total up to over $30K. The Yamar certainly seems to be a great engine and while I'll never recover anywhere near the cost, it may make the boat more salable once we are finished with her. BTW, the engine box lift struts on this boat are still just fine.

Bob Potter
28' TE Grenadier, Gulfport FL
User avatar
RobS
Gold Member
Gold Member
Posts: 4044
Joined: Wed Oct 03, 2007 6:20 am
Home Port: Center Moriches, NY
Contact:

Re: Engine cover struts

Post by RobS »

RWP wrote:...it may make the boat more salable once we are finished with her....
you mean I'm the only one who is silly enough to think "this is the last boat I'll ever own" !

BTW, love my 6LP :wink:
Rob S.
"TENACIOUS"
1974 Chris Craft 36' Commander Tournament
Cummins 6BTA 330B's

(Former Owner)
"TOY-RIFIC" 2000 28TE, 6LP, Hull 408

Luck is the residue of good design.
User avatar
jcollins
In Memorium
Posts: 4927
Joined: Sun Apr 16, 2006 9:05 pm
Home Port: Baltimore
Location: Seneca Creek Marina
Contact:

Re: Engine cover struts

Post by jcollins »

RobS wrote:
RWP wrote:...it may make the boat more salable once we are finished with her....
you mean I'm the only one who is silly enough to think "this is the last boat I'll ever own" !

BTW, love my 6LP :wink:
Your not alone. I'm another silly one. I'm even silly enough to believe (or blieve as they say in Balmer) I'll get 2000+ hrs. out of my Peninsular.
:lol:
John
Former - 28 TE Convertible"Afterglow"
RicM
Gold Member
Gold Member
Posts: 1209
Joined: Sat Dec 02, 2006 10:06 am
Location: Wickford RI
Contact:

Re: Engine cover struts

Post by RicM »

I'm counting on 10,000 hours from my 6LP.
Ric Murray

Big Time, 42' 1993 Jersey Sportfish
Formerly owned Time After Time, 2003 28TE
Wickford RI
User avatar
RobS
Gold Member
Gold Member
Posts: 4044
Joined: Wed Oct 03, 2007 6:20 am
Home Port: Center Moriches, NY
Contact:

Re: Engine cover struts

Post by RobS »

RicM wrote:I'm counting on 10,000 hours from my 6LP.
And how old are you?
Rob S.
"TENACIOUS"
1974 Chris Craft 36' Commander Tournament
Cummins 6BTA 330B's

(Former Owner)
"TOY-RIFIC" 2000 28TE, 6LP, Hull 408

Luck is the residue of good design.
RicM
Gold Member
Gold Member
Posts: 1209
Joined: Sat Dec 02, 2006 10:06 am
Location: Wickford RI
Contact:

Re: Engine cover struts

Post by RicM »

Harsh, Rob, very harsh.
Ric Murray

Big Time, 42' 1993 Jersey Sportfish
Formerly owned Time After Time, 2003 28TE
Wickford RI
User avatar
RobS
Gold Member
Gold Member
Posts: 4044
Joined: Wed Oct 03, 2007 6:20 am
Home Port: Center Moriches, NY
Contact:

Re: Engine cover struts

Post by RobS »

You're right, that was uncalled for, I'll tell you what, to make up for my harshness, invite me fishing when the clock says 9,999 and 'll bring along a bottle of Dom and a bottle of LPR and we'll celebrate when she turns 10K :wink: .
Rob S.
"TENACIOUS"
1974 Chris Craft 36' Commander Tournament
Cummins 6BTA 330B's

(Former Owner)
"TOY-RIFIC" 2000 28TE, 6LP, Hull 408

Luck is the residue of good design.
RWP
Gold Member
Gold Member
Posts: 25
Joined: Mon Feb 16, 2009 2:35 pm
Home Port: Saint Petersburg, FL
Location: St. Petersburg, FL

Re: Engine cover struts

Post by RWP »

At my age, this better be the last boat I ever own!


Bob
Post Reply

Return to “Albin Maintenance”