Running Lights

Post by **rangoons** » Fri Jun 20, 2008 11:32 am

Can someone please tell me how to get at the bulb in the running light on the port side?
Thanks in advance.

Post by **joe.baar** » Fri Jun 20, 2008 3:16 pm

I've seen a post about this subject here but I can't find it right now. If yours is the usual Aqua-Signal Series 41 this will work. There's a small-head Phillips captive screw just under the lower knuckle at the center. lift the housing up at the rear (inboard) side when that screw disengages.

Hopefully the photo from Fisheries Supply's catalog will show up here too.

Post by **rangoons** » Fri Jun 20, 2008 3:33 pm

Thank you for your help Joe, I'll try it.

Post by **RobS** » Mon Jun 23, 2008 8:57 pm

There's a small philips set screw, then it lifts off.

LillianpFD · Post by **LillianpFD** » Fri Jul 18, 2008 9:23 pm

where is the best palce to find the bulb for the running lights? West marine store is saying they don't stock them. I need one quick. looks like a 25 watt 12 volt bulb.

Albin Owners Group

Albin Owners Group

Running Lights

Running Lights

Running Lights - Port Nav Light

light bulb itself?