I have a 1990 32+2 and want to do some sound shield work on the engine compartment. Any suggestions on products or methods?
Appreciate the help.
Don
• Welcome to https://albinowners.net, the new home of Albin Owners Group!
• You will need to log in here, and you may want to bookmark this site. If you don't remember your password, use the I forgot my password link to reset it.
• All content has been transferred from our previous site.
• Contact Us if you have any questions or notice a problem. If you're not receiving our email, include a phone number where we can text you.
• You will need to log in here, and you may want to bookmark this site. If you don't remember your password, use the I forgot my password link to reset it.
• All content has been transferred from our previous site.
• Contact Us if you have any questions or notice a problem. If you're not receiving our email, include a phone number where we can text you.
FAQ:
• Membership information
• Burgees
• How to post photos
• Membership information
• Burgees
• How to post photos
Sound shield
-
dosched
- First Mate
- Posts: 23
- Joined: Tue Jun 07, 2016 5:16 pm
- Home Port: Stuart, FL
- Location: Stuart, FL
-
GOING COASTAL
- Gold Member
- Posts: 10
- Joined: Thu Nov 03, 2016 4:56 pm
- Home Port: PASADENA .Maryland
- Location: Magothy River
Re: Sound shield
I just replaced the sound insulation on my generator this year and got it from McMaster- Carr on line, comes in bulk width of 54"and its sold by the foot at about $18.00 a foot. I used product #5692T53 which has an adhesive to stick to the fiberglass and a foil to resist heat , you can go to home depot and buy a roll of foil faced tape by Nashua for duct work to seal the edges.Worked great for keeping the gen quiet
-
dosched
- First Mate
- Posts: 23
- Joined: Tue Jun 07, 2016 5:16 pm
- Home Port: Stuart, FL
- Location: Stuart, FL
Re: Sound shield
Thank you for the information. I'll go to their web site.