• Welcome to https://albinowners.net, the new home of Albin Owners Group!
• You will need to log in here, and you may want to bookmark this site. If you don't remember your password, use the I forgot my password link to reset it.
• All content has been transferred from our previous site.
Contact Us if you have any questions or notice a problem. If you're not receiving our email, include a phone number where we can text you.

Albin 28 Flush Deck Helm Post SetUp

Not model or forum specific.

Moderators: DougSea, RobS

Post Reply
VIBE
Deckhand
Deckhand
Posts: 6
Joined: Thu Oct 06, 2016 7:23 pm
Home Port: Danversport

Albin 28 Flush Deck Helm Post SetUp

Post by VIBE »

Albin28 Helm Setup.jpg
AOG,

I'm looking to replace my Helm Seat setup. Specifically the post (29") and the base that is installed into the floor. I know the base is manufactured by TODD Marine. However, does anyone have any idea where I can purchase the post (29") with the adapter attached to fit the base? Please see attached pic.

Thanks,

Tom
Radioman
Gold Member
Gold Member
Posts: 6
Joined: Thu Sep 22, 2016 4:01 pm
Home Port: Ft. Myers Beach, FL

Re: Albin 28 Flush Deck Helm Post SetUp

Post by Radioman »

Go to the TODD website, I saw them on there within the last month.
VIBE
Deckhand
Deckhand
Posts: 6
Joined: Thu Oct 06, 2016 7:23 pm
Home Port: Danversport

Re: Albin 28 Flush Deck Helm Post SetUp

Post by VIBE »

Thanks Radioman......I contacted Defender and they reached out to TODD. It's a special order item......they claimed they have not made one in 5 years. Part # 6900-29.........................Just in case anyone is interested...$157
User avatar
Pitou
Gold Member
Gold Member
Posts: 2091
Joined: Thu Feb 22, 2007 1:34 pm
Home Port: Gloucester, MA
Location: Essex, MA

Re: Albin 28 Flush Deck Helm Post SetUp

Post by Pitou »

VIBE wrote:I'm looking to replace my Helm Seat setup. Specifically the post (29") and the base that is installed into the floor.
Tom
Tom - Maybe Mrs. Claus can set you up with one of these as we all know that you deserve it! :wink:

viewtopic.php?f=5&t=3802&hilit=Yachty+in+one+easy+step
Back View of Llebroc.JPG
Front View of Llebroc.JPG
You do not have the required permissions to view the files attached to this post. To view images, please register for a free account.
kevinS
>><<>>;>

Former Boats:

- 2006 31TE / Hull# 221
Cummins QSC 8.3 / 500 hp
December '13 - April '23

- 2002 / 28TE / Hull# 614
Cummins 6BTA 370 hp / Alaskan Bulkhead
April '04 ~ May '13
VIBE
Deckhand
Deckhand
Posts: 6
Joined: Thu Oct 06, 2016 7:23 pm
Home Port: Danversport

Re: Albin 28 Flush Deck Helm Post SetUp

Post by VIBE »

Kevin,

Comfortable looking helm seat.....I would fall asleep in that thing.....than I would need autopilot :lol:
Tom Cunningham
Gold Member
Gold Member
Posts: 55
Joined: Fri May 13, 2016 3:09 pm
Home Port: San Diego-Mulege

Re: Albin 28 Flush Deck Helm Post SetUp

Post by Tom Cunningham »

I had a failure on my Todd post/base in the first picture and went with the thicker 3.5 post and base ring shown in the upgraded shot. Much stronger and still not that hard for a quick remove when needed......Tom.
Post Reply

Return to “General Discussion”