AOG,
I'm looking to replace my Helm Seat setup. Specifically the post (29") and the base that is installed into the floor. I know the base is manufactured by TODD Marine. However, does anyone have any idea where I can purchase the post (29") with the adapter attached to fit the base? Please see attached pic.
Thanks,
Tom
• Welcome to https://albinowners.net, the new home of Albin Owners Group!
• You will need to log in here, and you may want to bookmark this site. If you don't remember your password, use the I forgot my password link to reset it.
• All content has been transferred from our previous site.
• Contact Us if you have any questions or notice a problem. If you're not receiving our email, include a phone number where we can text you.
• You will need to log in here, and you may want to bookmark this site. If you don't remember your password, use the I forgot my password link to reset it.
• All content has been transferred from our previous site.
• Contact Us if you have any questions or notice a problem. If you're not receiving our email, include a phone number where we can text you.
FAQ:
• Membership information
• Burgees
• How to post photos
• Membership information
• Burgees
• How to post photos
Albin 28 Flush Deck Helm Post SetUp
-
VIBE
- Deckhand
- Posts: 6
- Joined: Thu Oct 06, 2016 7:23 pm
- Home Port: Danversport
-
Radioman
- Gold Member
- Posts: 6
- Joined: Thu Sep 22, 2016 4:01 pm
- Home Port: Ft. Myers Beach, FL
Re: Albin 28 Flush Deck Helm Post SetUp
Go to the TODD website, I saw them on there within the last month.
-
VIBE
- Deckhand
- Posts: 6
- Joined: Thu Oct 06, 2016 7:23 pm
- Home Port: Danversport
Re: Albin 28 Flush Deck Helm Post SetUp
Thanks Radioman......I contacted Defender and they reached out to TODD. It's a special order item......they claimed they have not made one in 5 years. Part # 6900-29.........................Just in case anyone is interested...$157
-
Pitou
- Gold Member
- Posts: 2091
- Joined: Thu Feb 22, 2007 1:34 pm
- Home Port: Gloucester, MA
- Location: Essex, MA
Re: Albin 28 Flush Deck Helm Post SetUp
Tom - Maybe Mrs. Claus can set you up with one of these as we all know that you deserve it!VIBE wrote:I'm looking to replace my Helm Seat setup. Specifically the post (29") and the base that is installed into the floor.
Tom
viewtopic.php?f=5&t=3802&hilit=Yachty+in+one+easy+step
You do not have the required permissions to view the files attached to this post. To view images, please register for a free account.
kevinS
>><<>>;>
Former Boats:
- 2006 31TE / Hull# 221
Cummins QSC 8.3 / 500 hp
December '13 - April '23
- 2002 / 28TE / Hull# 614
Cummins 6BTA 370 hp / Alaskan Bulkhead
April '04 ~ May '13
>><<>>;>
Former Boats:
- 2006 31TE / Hull# 221
Cummins QSC 8.3 / 500 hp
December '13 - April '23
- 2002 / 28TE / Hull# 614
Cummins 6BTA 370 hp / Alaskan Bulkhead
April '04 ~ May '13
-
VIBE
- Deckhand
- Posts: 6
- Joined: Thu Oct 06, 2016 7:23 pm
- Home Port: Danversport
Re: Albin 28 Flush Deck Helm Post SetUp
Kevin,
Comfortable looking helm seat.....I would fall asleep in that thing.....than I would need autopilot
Comfortable looking helm seat.....I would fall asleep in that thing.....than I would need autopilot
-
Tom Cunningham
- Gold Member
- Posts: 55
- Joined: Fri May 13, 2016 3:09 pm
- Home Port: San Diego-Mulege
Re: Albin 28 Flush Deck Helm Post SetUp
I had a failure on my Todd post/base in the first picture and went with the thicker 3.5 post and base ring shown in the upgraded shot. Much stronger and still not that hard for a quick remove when needed......Tom.