Tower is installed. Started plumbing the center fish box in the transom to serve as a bait tank. I removed the existing bait pump to find the seacock not closing allowing water in. I am assuming the ball is gone. Plugged for now but I need to replace the flanged seacock. Anyone done this before? Details please. They are not bolted thru the hull.
Mike
• Welcome to https://albinowners.net, the new home of Albin Owners Group!
• You will need to log in here, and you may want to bookmark this site. If you don't remember your password, use the I forgot my password link to reset it.
• All content has been transferred from our previous site.
• Contact Us if you have any questions or notice a problem. If you're not receiving our email, include a phone number where we can text you.
• You will need to log in here, and you may want to bookmark this site. If you don't remember your password, use the I forgot my password link to reset it.
• All content has been transferred from our previous site.
• Contact Us if you have any questions or notice a problem. If you're not receiving our email, include a phone number where we can text you.
FAQ:
• Membership information
• Burgees
• How to post photos
• Membership information
• Burgees
• How to post photos
Couple more projects!!
-
socalmike
- Gold Member
- Posts: 152
- Joined: Mon Sep 28, 2015 5:23 pm
- Home Port: san diego
-
Tree
- Gold Member
- Posts: 1615
- Joined: Fri Mar 22, 2013 12:28 pm
- Home Port: Portsmouth, UK
- Location: Bordon, UK
- Contact:
Re: Couple more projects!!
I had the same problem Mike. I assume you're back in the water now because I took the pump off and squirted some WD40 in the ball valve on mine to free it off.
Fisher Price 2
Hull Number AUL28489L900
Yanmar 6LP-STE
Built in Portsmouth RI, USA - Berthed in Portsmouth Hampshire, United Kingdom.
Hull Number AUL28489L900
Yanmar 6LP-STE
Built in Portsmouth RI, USA - Berthed in Portsmouth Hampshire, United Kingdom.
-
catalina_mike
- Gold Member
- Posts: 721
- Joined: Mon Mar 09, 2015 11:20 am
- Home Port: Dana Point
Re: Couple more projects!!
Mine are not flanged but I would use flanged and put a scoop on it. The ball valve is held in place from the thru hull. You have to hold it from the outside more than likley with something stuck into the thru hull. There are small tabs inside.. I have taken things out before using plungers while in the water on bigger boats but I would haul it to replace because of having to make sure you can remove it. In the mean time just add another valve in line..
Silverton 2007 36C
Sold - Albin 1999 28TE
SSI Instructor 13937
SDI / TDI Instructor 18172
USCG 100 Ton near coastal
Sold - Albin 1999 28TE
SSI Instructor 13937
SDI / TDI Instructor 18172
USCG 100 Ton near coastal